Weather-Watch.com

Weather Display => Weather Display for Mac => Topic started by: trbojet on December 04, 2018, 10:54:44 PM

Title: I-MAC No USB when setting up Weather Display
Post by: trbojet on December 04, 2018, 10:54:44 PM
I'm helping a buddy set up his I-Mac for Weather Display using a Davis VP2 with a USB Datalogger. We can't connect to Weather Display thru the USB. He has Weather Display 10.37 Mac build 307.   His I-Mac is Using OSX 10.9.5, 2.8 GH Intel Core 2 Duo and 2 GIG of Ram.  I went to Silicon Labs and downloaded/loaded the cp2102 usb to uart bridge controller.  I can see that when I go to:  about this mac/more info/sys report/usb.  When I go to the setup in WD the only thing that appears is bluetooth incoming port and bluetooth-modem.  Any help would be appreciated.
Title: Re: I-MAC No USB when setting up Weather Display
Post by: Weather Display on December 05, 2018, 01:14:11 AM
I think the latest silicon labs driver is not compatible with the latest OSX version?
Title: Re: I-MAC No USB when setting up Weather Display
Post by: trbojet on December 05, 2018, 01:40:46 AM
Any Workarounds?
Title: Re: I-MAC No USB when setting up Weather Display
Post by: Weather Display on December 05, 2018, 02:29:19 AM
a serial data logger and a compatible serial to usb adaptor and driver (they do seem to be more compatible)  8O

or some other Mac user might chime in with a better solution than above
Title: Re: I-MAC No USB when setting up Weather Display
Post by: rigger3 on December 10, 2018, 03:20:28 AM
Here is the version I am running of SiLabsUSBDriver
CP210x Macintosh OS X VCP Driver v5 Release Notes
Copyright (C) 2017-2018 Silicon Laboratories Inc.

I have just reinstalled do to a hard drive failure on the Mac mini and have it back up and running.

Make sure to close the other connections (/dev/cu.Bluetooth-Incoming-Port) and then open the /dev/cu.SLAB)USBtoUART port

I am running the same Vantage Pro 2 with great success on a Mac mini 2011 with macOS High Sierra 10.13.6
Title: Re: I-MAC No USB when setting up Weather Display
Post by: trbojet on January 23, 2019, 10:22:58 PM
Thanks, I'm going to give a try and see what happens.  Thanks for the reply