Davis Instruments 'WeatherLink Live'

I will test tonight when I get home from work. It has been extremely busy last few days with family and work commitments.

:thumbleft:

The results with this new version of ‘crondaviswll.exe’ are represented below and I have provided the API output as a comparison. All data is imperial unit and as there was a slight delay between the two activities, this is representing the variance below and worked no errors were encountered.

crondaviswll.exe
Daviswll output

{"data":{"did":"001D0AAAAAA","ts":1557810828,"conditions":[{"lsid":227174,"data_structure_type":1,"txid":1,"temp": 65.2,"hum":58.6,"dew_point": 50.3,"wet_bulb": 55.1,"heat_index": 64.1,"wind_chill": 65.2,"thw_index": 64.1,"thsw_index": 62.1,"wind_speed_last":4.00,"wind_dir_last":236,"wind_speed_avg_last_1_min":2.50,"wind_dir_scalar_avg_last_1_min":255,"wind_speed_avg_last_2_min":2.43,"wind_dir_scalar_avg_last_2_min":252,"wind_speed_hi_last_2_min":6.00,"wind_dir_at_hi_speed_last_2_min":279,"wind_speed_avg_last_10_min":2.43,"wind_dir_scalar_avg_last_10_min":234,"wind_speed_hi_last_10_min":6.00,"wind_dir_at_hi_speed_last_10_min":224,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":46,"uv_index":0.0,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":227177,"data_structure_type":2,"txid":4,"temp_1": 56.3,"temp_2": 54.6,"temp_3":null,"temp_4":null,"moist_soil_1":12.0,"moist_soil_2":26.1,"moist_soil_3":null,"moist_soil_4":null,"wet_leaf_1":0.1,"wet_leaf_2":null,"rx_state":1,"trans_battery_flag":0},{"lsid":227173,"data_structure_type":4,"temp_in": 79.0,"hum_in":38.1,"dew_point_in": 51.3,"heat_index_in": 77.8},{"lsid":227172,"data_structure_type":3,"bar_sea_level":30.338,"bar_trend":-0.019,"bar_absolute":30.235}]},"error":null}

http://wllip…/v1/real_time

{"data":{"broadcast_port":22222,"duration":1200},"error":null}

http://wllip…/v1/current_conditions

{"data":{"did":"001D0AAAAAAA","ts":1557808908,"conditions":[{"lsid":227174,"data_structure_type":1,"txid":1,"temp": 67.5,"hum":54.1,"dew_point": 50.3,"wet_bulb": 55.6,"heat_index": 66.7,"wind_chill": 67.5,"thw_index": 66.7,"thsw_index": 64.7,"wind_speed_last":2.00,"wind_dir_last":325,"wind_speed_avg_last_1_min":4.62,"wind_dir_scalar_avg_last_1_min":265,"wind_speed_avg_last_2_min":4.62,"wind_dir_scalar_avg_last_2_min":272,"wind_speed_hi_last_2_min":9.00,"wind_dir_at_hi_speed_last_2_min":298,"wind_speed_avg_last_10_min":3.75,"wind_dir_scalar_avg_last_10_min":263,"wind_speed_hi_last_10_min":9.00,"wind_dir_at_hi_speed_last_10_min":280,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":362,"uv_index":1.1,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":227177,"data_structure_type":2,"txid":4,"temp_1": 56.0,"temp_2": 54.6,"temp_3":null,"temp_4":null,"moist_soil_1":12.1,"moist_soil_2":25.9,"moist_soil_3":null,"moist_soil_4":null,"wet_leaf_1":0.1,"wet_leaf_2":null,"rx_state":0,"trans_battery_flag":0},{"lsid":227173,"data_structure_type":4,"temp_in": 79.4,"hum_in":40.3,"dew_point_in": 53.2,"heat_index_in": 78.4},{"lsid":227172,"data_structure_type":3,"bar_sea_level":30.333,"bar_trend":-0.027,"bar_absolute":30.230}]},"error":null}

in the debug window
the UDP real time data should show
and then every minute the other data should show (temp/hum/dew etc)
yes?

Yes, that is correct and is fully functional; however, it flashes up only for about a second and thus I didn’t notice the other data be displayed originally.


I should make it 2 data windows
but basicly everthing is working
although I suspect the UDP will time out (and the seconds it says for duration
i.e
{“data”:{“broadcast_port”:22222,“duration”:1200},“error”:null}
i.e 1200 seconds
so that will need to be called again, to get the udp data (i.e every 20 minutes)

Correct, everything is working and I will now let it run for the next 20 minutes (1200 secs) uninterrupted to verify the timeout.
I have sent a you a PM as picture paints a 1000 words.

It timed out as expected and displays the error message “143: Busy performing current action.”


Screen Shot 2019-05-14 at 19.44.48.png

try running it again until that happens again and then try clicking on test ?

Test reconnection - clicking test did not restore connection. PM Sent

new update to test :slight_smile:
http://www.weather-display.com/downloadfiles/crondaviswll.zip

vers 1.1

Test results:

Working and I am leaving it running as I need to go out again.
Both windows are refreshing and I noted a quick splash of a comment access violation. This is the flashing up when the T/H is parsed and presented in the top windows. This is captured. PM on way

with Brientim’s (and others) help WD now supports the Davis WLL :slight_smile:

Brian, I guess that there will be a new setup page within Weather Display where one will enter the information required to communicate with the WLL - then Weather Display will process the data acquire from the WLL. :?

Goto Control Panel > Station Type and Settings on the bottom left is the Davis Weather Link Live. Note http://ip_address and Enable.


Thanks for the screenshot. Since my last post, I have downloaded the latest update of Weather Display and noticed the new entry on the Davis weather stations page. :wink:

I have done an update to fix where rain was not being picked up :slight_smile:
support as also been added to the Mac and Linux versions now too
and I fixed an error in the crondaviswll

Thanks, Brian.

I will re-start my WD with WLL support, I will update that WD and will report - might take a few hours. Unfortunately, no rain is expected until Wednesday and/or Thursday night.

Is there an issue with Average Wind Speed and Current Wind Speed on Weather Display when using Weather Link Live? Now that I have changed to Weather Link Live from Weather Link IP, the wind speed no longer updates. Is this maybe due to having a separate Davis wireless Anemometer / Sensor Transmitter? Do I need to configure Weather Display differently for this type of set up with Weather Link Live?

ah, WD might not be picking up that data correctly, with your configuration
I will need a copy of the Daviswll.txt file