Solar setup is set right.
As a test i ran WD with Cronpakbusnew.exe as data feed and that worked fine.
So it has to be something within the WD Campbell Scientific setup i guess.
Its possible i continue using WD with Cronpakbusnew.exe but then im not using the full potential of the Lufft precipitation sensor.
When running WD without Cronpakbusnew.exe im using the full functions of the Lufft precipitation sensor with Loggernet.
Currently the table data available are:
field windspeed=Public.Windskm
field direction=Public.Windr
field humidity=Public.Vocht
field barometer=Public.BP_mbar
field rain=Public.Rain_mm
field precipitation type=Public.Precipitation_Type
field solar=Public.SlrW
field battery=Public.BattV
field temperature=Public.Temp
When im running WD with the Cronpakbusnew.exe (without Loggernet running and without the options to read and measure the precipitation types with Loggernet), i ideally need the data tables seen below wich i can program to get live pulse data, except the Total precipitation:
field rain=Public.Rain_mm
field snow=Public.Snow_mm
field sleet=Public.Sleet_mm
field freezing rain=Public.Freezing_Rain_mm
field hail=Public.Hail_mm
field total precipitation=Public.Total_Precipitation_mm (the current Public.Rain_mm wich show total)
Is it possible Brian to get those values in realtime shown? For example like the raindata on the mainscreen WD.
When using WD with the Cronpakbusnew.exe setup, currently its generating 60 CSV files to check for possible missing windgust.
Maybe that file can be used to check for possible missing precipitation types and amount when the extra data tables are in use?
The current
Just a thought Brian 
With kind regards.