Getting Solar to show on WU?

I just added a Solar sensor to my Vantage Pro 2. I Turned on the Main switch in WD, and it is showing the data locally.

However, on my WU PWS it acts as if there is no such thing as Solar. Pretty sure that before they did the update my page just showed “Unavailable” under both Solar and UV. It now shows UV as “Unavailable” but doesn’t even show a heading for Solar.

Here’s my station:
https://www.wunderground.com/dashboard/pws/KVTBELLO6

WD 10.37S build 87 in Win10/64 on i&-4770S @3.10GHz, 16GB RAM. 361 of 1460GB used.

make sure also that the switch is on in WD under control panel, solar setup

you can check what is sent to WU in the file sentwudata.txt

Yes, Solar Main is switched ON.

I can look at Solar/UV/ET Real Time Graph and see it being recorded.

Likewise in Advanced Charts, Solar, it shows the collected data.

Here is a copy of sentwudata.txt:

4:50:12 PM 4/15/2019
http://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?ID=KVTBELLO6&PASSWORD=myob&dateutc=2019-04-15+20%3A50%3A00&winddir=258&windspeedmph=10&windgustmph=18&humidity=80&tempf=42.3&rainin=0.000&baromin=29.363&dewptf=36.6&indoortempf=71.4&indoorhumidity=34&weather=RA&clouds=&dailyrainin=0.730&soiltempf=&soilmoisture=&leafwetness=0.0&softwaretype=WeatherDisplay%3A10.37S&action=updateraw
OK
success

Thanks

the best thing is to email me your settings files
but also upgrade to the latest version of WD

OK. will do. I only installed it about 2 months ago so it didn’t occur to me to update.

Thanks.

Hi

solar data is sent to WU with your settings with the latest update of WD

try updating to the latest version

and let me know

Updated to build 94 and do see Solar on WU now (0 as expected at this time).

Thank you

I think the particular version you had there was a bug :wink: