Data received counter

Why does the counter in my WD (10.37S93) client display increment by 3 every second? It uses clientraw.txt from the server (still on 10.37S90), where the count goes up by only one a second, as expected. It is not a new feature with build 93, but I can’t now remember when it started.

The two screenshots are separated by 18 seconds and the counter has gone up by 54.


Capture.PNG

Capture2.PNG

its been that way for a long time
use the latest .zip update

Thanks, Brian.

On purpose, or. . .?

Count is incrementing by 2 per second now. . .

as opposed to?

3

its increased by 1 here in testing with that version I have uploaded

My first post reported that the client display counter was showing, e.g., 3,6,9,12,15, etc. - nothing in between.

After using the .zip it’s showing 2,4,6,8,10, etc. - nothing in between.

Why doesn’t it show 1,2,3,4,5,6,7, etc., like the server display?

I downloaded/unzipped/ran the current .zip as a client reading clientraw, and the data count is incrementing by one, once per second.

Very strange.

Never mind, it doesn’t matter in the slightest. . . I only asked out of interest :slight_smile: