Connecting to Environdata Weather Maestro

try a new update
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip

humidity should work now and so should battery volts (e.g %batteryvolts% custom tag)

Thanks Brian, that looks to be working ok now. I’ve got a few sensor issues to repair before I know that everything works 100%, but everything that is working on the Maestro is now reporting accurately on WD, so that’s great!
Thanks for your help, much appreciated!
Scott

Hi Brian
I’ve got the sensors working now, but doesn’t look like the data is coming through correctly for solar or barometric. Here’s the relevant lines:

raw data →
6 "Solar Radiation ← end
raw data → " (SR41): +0000000.0 Wat<- end
raw data ->ts/m2
7 "Barom<- end

raw data →
12 "Barometric ← end
raw data ->Pressure " (BP40): +000599.96 hPa<- end

(the solar is zero as it’s night time, and the barometric I still need to work out the calibration factors for - but both are working)

Also, each time I start the software I need to re-select the station type. Should the software remember that?

Thanks
Scott

try this update
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip

Hi Brian
Not quite right yet, here’s how the solar looks in the debug file:

raw data →
6 "Solar Radiation " (SR41): +000014<- end
raw data ->5.0 Watts/m2
7 ← end

The barometric is also still split:

raw data →
12 "Barometric Pressure " (BP4<- end
raw data ->0): +000000.00 hPa
← end

Thanks for your help, much appreciated!

try another update re the barometer
and also post the whole data debug window
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip

Thanks Brian
Barometer still 1013.0 on the summary screen.
I can’t tell if solar is coming through ok as it’s dark out.
Thanks for all your assistance.

Here’s the debug file for a full read cycle:

R

#13 found 50

2019/02/23 22:42:16 Title “Bunya:304BP.dl3”

#13 found 109

Sensor Name Model Value Unit

#13 found 168

1 "Wind Speed " (WS45): +000002.05 km/h

raw data ->R
2019/02/23 22:42:16 Title “Bunya:304BP.dl3”
Sensor Name Model Value Unit
1 "Wind Speed " (WS45): +000002.05 km/h
2 "Wind Direction<- end
raw data → " (WD45): +000080.48 ← end
raw data ->Degrees<- end
#13 found 1

2 "Wind Direction " (WD45): +000080.48 Degrees

raw data →
3 "Relative Humidity " (RH40): +000057.32 %<- end
#13 found 1

3 "Relative Humidity " (RH40): +000057.32 %

raw data →
4 "Air Tem<- end
raw data ->perature " (TA40): +000022.10 Degrees ← end
#13 found 1

4 "Air Temperature " (TA40): +000022.10 Degrees

raw data →
5 "Rain Gauge<- end
raw data → " (RG12): +000000.00 mm<- end
#13 found 1

5 "Rain Gauge " (RG12): +000000.00 mm

raw data →
6 "Solar Radiation " (SR<- end
raw data ->41): +0000000.0 Watts/m2<- end
**raw solar data 41): +0000000.0 Watt
#13 found 1

6 "Solar Radiation " (SR41): +0000000.0 Watts/m2

raw data →
7 "exBP " (BP40): +0000415.0 hPa<- end
#13 found 1

7 "exBP " (BP40): +0000415.0 hPa

raw data →
8 "exSola<- end
raw data ->r " ( ): +0000000.0 V<- end
#13 found 1

8 "exSolar " ( ): +0000000.0 V

raw data →
9 "exExt " ← end
raw data ->( ): +000000000 Units<- end
#13 found 1

9 "exExt " ( ): +000000000 Units

raw data →
10 " ← end
raw data → " ( ): +000000000 ← end
#13 found 1

10 " " ( ): +000000000

raw data →
11 " " ( ): +<- end
#13 found 11

11 " " ( ): +000000000

raw data ->000000000
← end
raw data → 12 "Barometric Pressure " (BP40): +001014.96 hPa<- end
#13 found 1

12 "Barometric Pressure " (BP40): +001014.96 hPa

raw data →
13 "ex(VCos) ← end
raw data → " ( ): +000000.00 km/h<- end
#13 found 1

13 "ex(VCos) " ( ): +000000.00 km/h

raw data →
14 "ex(VSin) " ( ← end
#13 found 19

14 "ex(VSin) " ( ): +000000.00 km/h

raw data ->): +000000.00 km/h
← end
raw data → 15 "exEvap " ( ): +<- end
#13 found 13

15 "exEvap " ( ): +000000.00 mm

raw data ->000000.00 mm
← end
raw data → 16 " " ( ): +000000000 ← end
#13 found 1

16 " " ( ): +000000000

raw data →
17 "WDIR Cosine ← end
raw data → " ( ): +00000.157 ← end
#13 found 1

17 "WDIR Cosine " ( ): +00000.157

raw data →
18 "WDIR Sine " ( )<- end
#13 found 14

18 "WDIR Sine " ( ): +00000.987

raw data ->: +00000.987
← end
raw data → 19 " " ( ): +000<- end
#13 found 8

19 " " ( ): +000000000

raw data ->000000
20<- end
raw data → " " ( ): +000000000 ← end
#13 found 1

20 " " ( ): +000000000

raw data →
21 "<- end
raw data ->Battery Voltage " ( ): +000012.35 V<- end
#13 found 1

21 "Battery Voltage " ( ): +000012.35 V

raw data →
22 "Load Current ← end
raw data → " ( ): +000042.08 mA<- end
#13 found 1

22 "Load Current " ( ): +000042.08 mA

raw data →
23 "Solar Voltage " ( ): +000<- end
#13 found 9

23 "Solar Voltage " ( ): +000000.00 V

raw data ->000.00 V
24<- end
raw data → "Charge Current " ( ): +000000.00 mA<- end
#13 found 1

24 "Charge Current " ( ): +000000.00 mA

raw data →
25 "Peak Wind Gust ← end
raw data → " ( ): +000003.00 km/h<- end
#13 found 1

25 "Peak Wind Gust " ( ): +000003.00 km/h

raw data →
26 "Inst. Wind Speed " ( ): ← end
raw data ->+000001.00 km/h<- end
#13 found 1

26 "Inst. Wind Speed " ( ): +000001.00 km/h

raw data →
27 "Inst. Wind Direction " ( ): +000<- end
#13 found 15

27 "Inst. Wind Direction " ( ): +000080.88 Degrees

raw data ->080.88 Degrees
← end
raw data → 28 "N/-S Wind Sp (VCos) " ( ): +000000.3<- end
#13 found 7

28 "N/-S Wind Sp (VCos) " ( ): +000000.32 km/h

raw data ->2 km/h
29 "E<- end
raw data ->/-W Wind Sp (VSin) " ( ): +000002.02 km/h<- end
#13 found 1

29 "E/-W Wind Sp (VSin) " ( ): +000002.02 km/h

raw data →
30 "9am Rain Total ← end
raw data → " ( ): +000000.00 mm<- end
#13 found 1

30 "9am Rain Total " ( ): +000000.00 mm

raw data →
31 "Evaporation " ( ): +00000<- end
#13 found 8

31 "Evaporation " ( ): +00000.000 mm

raw data ->.000 mm
32 ← end
raw data → "Communications " ( ): +000001.00<- end
#13 found 9

32 "Communications " ( ): +000001.00 Minutes

raw data → Minutes

← end

OK, we are making progress
try another update
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip

Thanks Brian
Still doesn’t seem to be picking up readings for barometer or solar - and battery seems to have dropped off now too.
Thanks
Scott

debug file:

R

#13 found 50

2019/02/24 17:23:16 Title “Bunya:304BP.dl3”

#13 found 109

Sensor Name Model Value Unit

#13 found 168

1 "Wind Speed " (WS45): +000002.25 km/h

raw data ->R
2019/02/24 17:23:16 Title “Bunya:304BP.dl3”
Sensor Name Model Value Unit
1 "Wind Speed " (WS45): +000002.25 km/h
2 "Wind Direction " (WD45): +000080.48 Degrees<- end
#13 found 1

2 "Wind Direction " (WD45): +000080.48 Degrees

raw data →
3 "Relative Humidity " (RH40):<- end
raw data → +000043.49 %<- end
#13 found 1

3 "Relative Humidity " (RH40): +000043.49 %

raw data →
4 "Air Te<- end
raw data ->mperature " (TA40): +000026.56 Degrees<- end
#13 found 2

4 "Air Temperature " (TA40): +000026.56 Degrees

raw data →
5 "Rain Gauge<- end
raw data → " (RG12): +000000.00 mm<- end
#13 found 1

5 "Rain Gauge " (RG12): +000000.00 mm

raw data →
6 "Solar Radiation " (SR<- end
raw data ->41): +0000038.3 Watts/m2<- end
**raw solar data 41): +0000038.3 Watt
#13 found 1

6 "Solar Radiation " (SR41): +0000038.3 Watts/m2

raw data →
7 "exBP " (BP40): +0000415.0 hPa<- end
#13 found 1

7 "exBP " (BP40): +0000415.0 hPa

raw data →
8 "exSola<- end
raw data ->r " ( ): +0000000.0 V<- end
#13 found 1

8 "exSolar " ( ): +0000000.0 V

raw data →
9 "exExt "<- end
raw data → ( ): +000000000 Units<- end
#13 found 1

9 "exExt " ( ): +000000000 Units

raw data →
10 " " ( ← end
raw data → ): +000000000 ← end
#13 found 1

10 " " ( ): +000000000

raw data →
11 " " ( ): +<- end
#13 found 11

11 " " ( ): +000000000

raw data ->000000000
← end
raw data → 12 "Barometric Pressure " (BP40): +001060.96 hPa<- end
#13 found 1

12 "Barometric Pressure " (BP40): +001060.96 hPa

raw data →
13 "ex(VCos) ← end
raw data → " ( ): +000000.00 km/h<- end
#13 found 1

13 "ex(VCos) " ( ): +000000.00 km/h

raw data →
14 "ex(VSin) " ( ← end
#13 found 19

14 "ex(VSin) " ( ): +000000.00 km/h

raw data ->): +000000.00 km/h
← end
raw data → 15 "exEvap " ( ): +000000.00 mm<- end
#13 found 1

15 "exEvap " ( ): +000000.00 mm

raw data →
← end
raw data → 16 " " ( ): +000000000 ← end
#13 found 1

16 " " ( ): +000000000

raw data →
17 "WDIR Cosine ← end
raw data → " ( ): +00000.157 ← end
#13 found 1

17 "WDIR Cosine " ( ): +00000.157

raw data →
18 "WDIR Sine " ( )<- end
#13 found 14

18 "WDIR Sine " ( ): +00000.987

raw data ->: +00000.987
← end
raw data → 19 " " ( ): +000000000 ← end
#13 found 1

19 " " ( ): +000000000

raw data →
2<- end
raw data ->0 " " ( ): +000000000 ← end
#13 found 1

20 " " ( ): +000000000

raw data →
21 "Battery Voltage<- end
raw data → " ( ): +000013.18 V<- end
#13 found 1

21 "Battery Voltage " ( ): +000013.18 V

raw data →
22 "Load Current " ( ): ← end
raw data ->+000039.65 mA<- end
#13 found 1

22 "Load Current " ( ): +000039.65 mA

raw data →
23 "Solar Voltage " ( ): +000<- end
#13 found 9

23 "Solar Voltage " ( ): +000000.00 V

raw data ->000.00 V
24<- end
raw data → "Charge Current " ( ): +000000.00 mA<- end
#13 found 1

24 "Charge Current " ( ): +000000.00 mA

raw data →
25 "Peak Wind Gust ← end
raw data → " ( ): +000004.00 km/h<- end
#13 found 1

25 "Peak Wind Gust " ( ): +000004.00 km/h

raw data →
26 "Inst. Wind Speed " ( ): ← end
raw data ->+000003.00 km/h<- end
#13 found 1

26 "Inst. Wind Speed " ( ): +000003.00 km/h

raw data →
27 "Inst. Wind Direction " ( ): +000<- end
#13 found 15

27 "Inst. Wind Direction " ( ): +000080.88 Degrees

raw data ->080.88 Degrees
2<- end
raw data ->8 "N/-S Wind Sp (VCos) " ( ): +000000.35 km/h<- end
#13 found 1

28 "N/-S Wind Sp (VCos) " ( ): +000000.35 km/h

raw data →
29 "E<- end
raw data ->/-W Wind Sp (VSin) " ( ): +000002.22 km/h<- end
#13 found 1

29 "E/-W Wind Sp (VSin) " ( ): +000002.22 km/h

raw data →
30 "9am Rain Total ← end
raw data → " ( ): +000000.00 mm<- end
#13 found 1

30 "9am Rain Total " ( ): +000000.00 mm

raw data →
31 "Evaporation " ( ): +0000<- end
#13 found 9

31 "Evaporation " ( ): +00000.000 mm

raw data ->0.000 mm
32 ← end
raw data → "Communications " ( ): +000001.0<- end
#13 found 10

32 "Communications " ( ): +000001.00 Minutes

raw data ->0 Minutes

← end

humm, I don’t think you have the correct update
try the test download again?

yes, you’re right. something went wrong there. I can see from the debug file that it’s locating the baro reading now, but still showing 1013.0 on the wd screen.
can’t tell what solar is doing, night time again.
latest debug file below, thanks again!

#13 found 5
raw data →

R
← end
#13 found 48
raw data →
2019/02/24 23:18:17 Title “Bunya:304BP.dl3”
← end
#13 found 59
raw data →
Sensor Name Model Value Unit
← end
#13 found 59
raw data →
1 "Wind Speed " (WS45): +000001.70 km/h
← end
#13 found 62
raw data →
2 "Wind Direction " (WD45): +000080.43 Degrees
← end
#13 found 56
raw data →
3 "Relative Humidity " (RH40): +000062.99 %
← end
#13 found 63
raw data →
4 "Air Temperature " (TA40): +000021.66 Degrees
← end
**temperature decode = +000021.66
#13 found 57
raw data →
5 "Rain Gauge " (RG12): +000000.00 mm
← end
#13 found 63
raw data →
6 "Solar Radiation " (SR41): +0000000.0 Watts/m2
← end
**raw solar data +0000000.0 Watts/m2

**raw solar data >+0000000.0 ←
#13 found 58
raw data →
7 "exBP " (BP40): +0000415.0 hPa
← end
#13 found 56
raw data →
8 "exSolar " ( ): +0000000.0 V
← end
#13 found 60
raw data →
9 "exExt " ( ): +000000000 Units
← end
#13 found 55
raw data →
10 " " ( ): +000000000
← end
#13 found 55
raw data →
11 " " ( ): +000000000
← end
#13 found 58
raw data →
12 "Barometric Pressure " (BP40): +001014.96 hPa
← end
***raw baro +001014.96 hPa

#13 found 59
raw data →
13 "ex(VCos) " ( ): +000000.00 km/h
← end
#13 found 59
raw data →
14 "ex(VSin) " ( ): +000000.00 km/h
← end
#13 found 57
raw data →
15 "exEvap " ( ): +000000.00 mm
← end
#13 found 55
raw data →
16 " " ( ): +000000000
← end
#13 found 55
raw data →
17 "WDIR Cosine " ( ): +00000.158
← end
#13 found 55
raw data →
18 "WDIR Sine " ( ): +00000.987
← end
#13 found 55
raw data →
19 " " ( ): +000000000
← end
#13 found 55
raw data →
20 " " ( ): +000000000
← end
#13 found 56
raw data →
21 "Battery Voltage " ( ): +000012.45 V
← end
#13 found 57
raw data →
22 "Load Current " ( ): +000041.20 mA
← end
#13 found 56
raw data →
23 "Solar Voltage " ( ): +000000.00 V
← end
#13 found 57
raw data →
24 "Charge Current " ( ): +000000.00 mA
← end
#13 found 59
raw data →
25 "Peak Wind Gust " ( ): +000003.00 km/h
← end
#13 found 59
raw data →
26 "Inst. Wind Speed " ( ): +000002.00 km/h
← end
#13 found 62
raw data →
27 "Inst. Wind Direction " ( ): +000079.57 Degrees
← end
#13 found 59
raw data →
28 "N/-S Wind Sp (VCos) " ( ): +000000.27 km/h
← end
#13 found 59
raw data →
29 "E/-W Wind Sp (VSin) " ( ): +000001.68 km/h
← end
#13 found 57
raw data →
30 "9am Rain Total " ( ): +000000.00 mm
← end
#13 found 57
raw data →
31 "Evaporation " ( ): +00000.000 mm
← end
#13 found 62
raw data →
32 "Communications " ( ): +000001.00 Minutes
← end

step by step we will get there
I will add a bit more debug info

I see what is wrong now…a good brew of coffee helped
download a new test update, ready now :slight_smile:

Hi Brian
Still not quite there by the look of things.
Baro & solar not reporting on WD display.
thanks
Scott

R
← end
#13 found 48
raw data →
2019/02/25 07:02:16 Title “Bunya:304BP.dl3”
← end
#13 found 59
raw data →
Sensor Name Model Value Unit
← end
#13 found 59
raw data →
1 "Wind Speed " (WS45): +000000.75 km/h
← end
#13 found 62
raw data →
2 "Wind Direction " (WD45): +000080.48 Degrees
← end
#13 found 56
raw data →
3 "Relative Humidity " (RH40): +000084.49 %
← end
#13 found 63
raw data →
4 "Air Temperature " (TA40): +000018.63 Degrees
← end
**temperature decode = +000018.63
#13 found 57
raw data →
5 "Rain Gauge " (RG12): +000000.00 mm
← end
#13 found 63
raw data →
6 "Solar Radiation " (SR41): +0000014.1 Watts/m2
← end
**raw solar data +0000014.1 Watts/m2

**raw solar data >+0000014.1<-
#13 found 58
raw data →
7 "exBP " (BP40): +0000415.0 hPa
← end
#13 found 56
raw data →
8 "exSolar " ( ): +0000000.0 V
← end
#13 found 60
raw data →
9 "exExt " ( ): +000000000 Units
← end
#13 found 55
raw data →
10 " " ( ): +000000000
← end
#13 found 55
raw data →
11 " " ( ): +000000000
← end
#13 found 58
raw data →
12 "Barometric Pressure " (BP40): +001031.96 hPa
← end
***raw baro +001031.96 hPa

#13 found 59
raw data →
13 "ex(VCos) " ( ): +000000.00 km/h
← end
#13 found 59
raw data →
14 "ex(VSin) " ( ): +000000.00 km/h
← end
#13 found 57
raw data →
15 "exEvap " ( ): +000000.00 mm
← end
#13 found 55
raw data →
16 " " ( ): +000000000
← end
#13 found 55
raw data →
17 "WDIR Cosine " ( ): +00000.157
← end
#13 found 55
raw data →
18 "WDIR Sine " ( ): +00000.987
← end
#13 found 55
raw data →
19 " " ( ): +000000000
← end
#13 found 55
raw data →
20 " " ( ): +000000000
← end
#13 found 56
raw data →
21 "Battery Voltage " ( ): +000012.69 V
← end
#13 found 57
raw data →
22 "Load Current " ( ): +000040.76 mA
← end
#13 found 56
raw data →
23 "Solar Voltage " ( ): +000000.00 V
← end
#13 found 57
raw data →
24 "Charge Current " ( ): +000000.00 mA
← end
#13 found 59
raw data →
25 "Peak Wind Gust " ( ): +000002.00 km/h
← end
#13 found 59
raw data →
26 "Inst. Wind Speed " ( ): +000001.00 km/h
← end
#13 found 62
raw data →
27 "Inst. Wind Direction " ( ): +000080.88 Degrees
← end
#13 found 59
raw data →
28 "N/-S Wind Sp (VCos) " ( ): +000000.12 km/h
← end
#13 found 59
raw data →
29 "E/-W Wind Sp (VSin) " ( ): +000000.74 km/h
← end
#13 found 57
raw data →
30 "9am Rain Total " ( ): +000000.00 mm
← end
#13 found 57
raw data →
31 "Evaporation " ( ): +00000.000 mm
← end
#13 found 62
raw data →
32 "Communications " ( ): +000001.00 Minutes
← end

I think I know what is wrong
try a new test .zip update download again
(‘thankyou, next’)

Hi Brian
Sorry, still seems to be the same.
Debug file below.
I’ve also extracted the raw input from the weather station in case that’s useful to you. I did this via a terminal window, not wd, so should be exactly what the station is sending.
Thanks
Scott

=============
raw data →

R
← end
#13 found 48
raw data →
2019/02/26 06:51:17 Title “Bunya:304BP.dl3”
← end
#13 found 59
raw data →
Sensor Name Model Value Unit
← end
#13 found 59
raw data →
1 "Wind Speed " (WS45): +000001.00 km/h
← end
#13 found 62
raw data →
2 "Wind Direction " (WD45): +000080.43 Degrees
← end
#13 found 56
raw data →
3 "Relative Humidity " (RH40): +000081.50 %
← end
#13 found 63
raw data →
4 "Air Temperature " (TA40): +000019.17 Degrees
← end
**temperature decode = +000019.17
#13 found 57
raw data →
5 "Rain Gauge " (RG12): +000000.00 mm
← end
#13 found 63
raw data →
6 "Solar Radiation " (SR41): +0000015.8 Watts/m2
← end
**raw solar data +0000015.8 Watts/m2

**raw solar data >0000015.8<-
sucess solar data
#13 found 58
raw data →
7 "exBP " (BP40): +0000415.0 hPa
← end
#13 found 56
raw data →
8 "exSolar " ( ): +0000000.0 V
← end
#13 found 60
raw data →
9 "exExt " ( ): +000000000 Units
← end
#13 found 55
raw data →
10 " " ( ): +000000000
← end
#13 found 55
raw data →
11 " " ( ): +000000000
← end
#13 found 58
raw data →
12 "Barometric Pressure " (BP40): +001034.00 hPa
← end
***raw baro +001034.00 hPa

***raw baro2 001034.00hPa
*barometer data >001034.00h<
#13 found 59
raw data →
13 "ex(VCos) " ( ): +000000.00 km/h
← end
#13 found 59
raw data →
14 "ex(VSin) " ( ): +000000.00 km/h
← end
#13 found 57
raw data →
15 "exEvap " ( ): +000000.00 mm
← end
#13 found 55
raw data →
16 " " ( ): +000000000
← end
#13 found 55
raw data →
17 "WDIR Cosine " ( ): +00000.158
← end
#13 found 55
raw data →
18 "WDIR Sine " ( ): +00000.987
← end
#13 found 55
raw data →
19 " " ( ): +000000000
← end
#13 found 55
raw data →
20 " " ( ): +000000000
← end
#13 found 56
raw data →
21 "Battery Voltage " ( ): +000012.94 V
← end
#13 found 57
raw data →
22 "Load Current " ( ): +000040.09 mA
← end
#13 found 56
raw data →
23 "Solar Voltage " ( ): +000000.00 V
← end
#13 found 57
raw data →
24 "Charge Current " ( ): +000000.00 mA
← end
#13 found 59
raw data →
25 "Peak Wind Gust " ( ): +000002.00 km/h
← end
#13 found 59
raw data →
26 "Inst. Wind Speed " ( ): +000001.00 km/h
← end
#13 found 62
raw data →
27 "Inst. Wind Direction " ( ): +000079.57 Degrees
← end
#13 found 59
raw data →
28 "N/-S Wind Sp (VCos) " ( ): +000000.16 km/h
← end
#13 found 59
raw data →
29 "E/-W Wind Sp (VSin) " ( ): +000000.99 km/h
← end
#13 found 57
raw data →
30 "9am Rain Total " ( ): +000000.00 mm
← end
#13 found 57
raw data →
31 "Evaporation " ( ): +00000.000 mm
← end
#13 found 62
raw data →
32 "Communications " ( ): +000001.00 Minutes
← end
#13 found 5

======================

r
2019/02/26 23:25:35 Title “Bunya:304BP.dl3”
Sensor Name Model Value Unit
1 "Wind Speed " (WS45): +000001.00 km/h
2 "Wind Direction " (WD45): +000080.48 Degrees
3 "Relative Humidity " (RH40): +000083.65 %
4 "Air Temperature " (TA40): +000018.46 Degrees
5 "Rain Gauge " (RG12): +000000.00 mm
6 "Solar Radiation " (SR41): +0000000.0 Watts/m2
7 "exBP " (BP40): +0000415.0 hPa
8 "exSolar " ( ): +0000000.0 V
9 "exExt " ( ): +000000000 Units
10 " " ( ): +000000000
11 " " ( ): +000000000
12 "Barometric Pressure " (BP40): +001014.96 hPa
13 "ex(VCos) " ( ): +000000.00 km/h
14 "ex(VSin) " ( ): +000000.00 km/h
15 "exEvap " ( ): +000000.00 mm
16 " " ( ): +000000000
17 "WDIR Cosine " ( ): +00000.157
18 "WDIR Sine " ( ): +00000.987
19 " " ( ): +000000000
20 " " ( ): +000000000
21 "Battery Voltage " ( ): +000012.73 V
22 "Load Current " ( ): +000040.76 mA
23 "Solar Voltage " ( ): +000000.00 V
24 "Charge Current " ( ): +000000.00 mA
25 "Peak Wind Gust " ( ): +000001.00 km/h
26 "Inst. Wind Speed " ( ): +000001.00 km/h
27 "Inst. Wind Direction " ( ): +000080.88 Degrees
28 "N/-S Wind Sp (VCos) " ( ): +000000.16 km/h
29 "E/-W Wind Sp (VSin) " ( ): +000000.99 km/h
30 "9am Rain Total " ( ): +000000.00 mm
31 "Evaporation " ( ): +00000.000 mm
32 "Communications " ( ): +000001.00 Minutes

OK, I see the problem re the barometer
see here
*barometer data >001034.00h<
there is the h being picked up

use another new .zip test update, same url, and it should work now

Success! The barometer is coming through a-ok now!
Still nothing on the solar though. Here’s the latest debug file.

Also, the system remembers that it’s talking to a WM2000 ok, but doesn’t seem to initiate comms until I go to setup… station… and hit ok without changing anything. Because I’ve been troubleshooting each time I haven’t waited more than a couple of minutes for it to initiate comms so perhaps I’ve just been impatient but it seems a bit odd.

Many thanks!
Scott


Doing checking of time zone calculation
Daylight saving not in use
Loaded all time records
Connected OK to com port 8
#13 found 1
raw data →
← end
#13 found 38
raw data →
;Environdata DL3000 V1.67 2010/04/12
← end
#13 found 23
raw data →
;%01000000% 1111-0304
← end
Doing checking of time zone calculation
Daylight saving not in use
#13 found 5
raw data →

R
← end
#13 found 48
raw data →
2019/02/27 07:06:16 Title “Bunya:304BP.dl3”
← end
#13 found 59
raw data →
Sensor Name Model Value Unit
← end
#13 found 59
raw data →
1 "Wind Speed " (WS45): +000000.45 km/h
← end
#13 found 62
raw data →
2 "Wind Direction " (WD45): +000080.48 Degrees
← end
#13 found 56
raw data →
3 "Relative Humidity " (RH40): +000075.82 %
← end
#13 found 63
raw data →
4 "Air Temperature " (TA40): +000020.26 Degrees
← end
**temperature decode = +000020.26
#13 found 57
raw data →
5 "Rain Gauge " (RG12): +000000.00 mm
← end
#13 found 63
raw data →
6 "Solar Radiation " (SR41): +0000027.5 Watts/m2
← end
**raw solar data +0000027.5 Watts/m2

**raw solar data >0000027.5<-
sucess solar data
#13 found 58
raw data →
7 "exBP " (BP40): +0000415.0 hPa
← end
#13 found 56
raw data →
8 "exSolar " ( ): +0000000.0 V
← end
#13 found 60
raw data →
9 "exExt " ( ): +000000000 Units
← end
#13 found 55
raw data →
10 " " ( ): +000000000
← end
#13 found 55
raw data →
11 " " ( ): +000000000
← end
#13 found 58
raw data →
12 "Barometric Pressure " (BP40): +001047.96 hPa
← end
***raw baro +001047.96 hPa

***raw baro2 001047.96hPa
*barometer data >001047.96<
#13 found 59
raw data →
13 "ex(VCos) " ( ): +000000.00 km/h
← end
#13 found 59
raw data →
14 "ex(VSin) " ( ): +000000.00 km/h
← end
#13 found 57
raw data →
15 "exEvap " ( ): +000000.00 mm
← end
#13 found 55
raw data →
16 " " ( ): +000000000
← end
#13 found 55
raw data →
17 "WDIR Cosine " ( ): +00000.157
← end
#13 found 55
raw data →
18 "WDIR Sine " ( ): +00000.987
← end
#13 found 55
raw data →
19 " " ( ): +000000000
← end
#13 found 55
raw data →
20 " " ( ): +000000000
← end
#13 found 56
raw data →
21 "Battery Voltage " ( ): +000013.04 V
← end
#13 found 57
raw data →
22 "Load Current " ( ): +000016.61 mA
← end
#13 found 56
raw data →
23 "Solar Voltage " ( ): +000000.00 V
← end
#13 found 57
raw data →
24 "Charge Current " ( ): +000000.00 mA
← end
#13 found 59
raw data →
25 "Peak Wind Gust " ( ): +000001.00 km/h
← end
#13 found 59
raw data →
26 "Inst. Wind Speed " ( ): +000001.00 km/h
← end
#13 found 62
raw data →
27 "Inst. Wind Direction " ( ): +000080.88 Degrees
← end
#13 found 59
raw data →
28 "N/-S Wind Sp (VCos) " ( ): +000000.07 km/h
← end
#13 found 59
raw data →
29 "E/-W Wind Sp (VSin) " ( ): +000000.44 km/h
← end
#13 found 57
raw data →
30 "9am Rain Total " ( ): +000000.00 mm
← end
#13 found 57
raw data →
31 "Evaporation " ( ): +00000.000 mm
← end
#13 found 62
raw data →
32 "Communications " ( ): +000000.00 Minutes
← end
#13 found 5

solar data should be working
ie as it says
success solar data

also make sure the switch is on under control panel, solar setup

I will check on the start up…

I see the start up issue
use this update
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip

and see if the solar shows up now above the windspeed dial?