That mostly worked, thanks.
Reports RH at 90% despite it being 0.1% (sensor seems broken, still look into that). Looks to be an error in that tag per the debug file, will past latest version below.
Not critical, but does this mean I can also pick up fields like Battery Voltage and display them?
Many thanks!
Scott
aw data ->R
2019/01/30 20:23:10 Title “BP:304.dl3”
Sensor Name Model Value Unit
1 "Wind Speed " (WS45): +000001.20 km/h
2 "Wind Direction " (WD<- end
raw data ->45): +000000.00<- end
raw data → Degrees
3 "Re<- end
raw data ->lative Humidity " (RH40): -000000.10 %<- end
raw data →
4 "Air Te<- end
raw data ->mperature " (TA40): +000025.76 Degrees ← end
raw data →
5 "Rain Gauge "<- end
raw data → (RG12): +001000.00 mm<- end
raw data →
6 "Solar Radiation " (SR41): +0000000.0<- end
raw data → Watts/m2
← end
raw data → 17 "WDIR Cosine " ( ): +00001.000 ← end
raw data →
18 "WDIR Si<- end
raw data ->ne " ( ): +00000.000 ← end
raw data →
21 "Battery Vol<- end
raw data ->tage " ( ): +000012.62 V<- end
raw data →
22 "Load Current " ( ← end
raw data ->): +000043.46 mA
← end
raw data →
23 "Solar Voltage " ( ): +000001.34 V<- end
raw data →
24 "Charge C<- end
raw data ->urrent " ( ): +000000.00 mA<- end
raw data →
25 "Peak Wind Gust " (<- end
raw data → ): +000002.00 km/h<- end
raw data →
26 "Inst. Wind Speed " ( ): +000001.00 k<- end
raw data ->m/h
← end
raw data →
27 "Inst. Wind Direction " ( ): +000000.00 Degre<- end
raw data ->es
← end
raw data ->28 "N/-S Wind Sp (VCos) " ( ): +000001.20 km/h<- end
raw data →
29 "E/-W Wind Sp ← end
raw data ->(VSin) " ( ): +000000.00 km/h<- end
raw data →
30 "9am Rain Total " ( )<- end
raw data ->: +010000.00 mm
← end
raw data → 31 "Evaporation " ( ): +nan mm<- end
raw data →
32 "Communica<- end
raw data ->tions " ( ): +000001.00 Minutes<- end
raw data →
← end