No problem! (Reminds me a bit of the old version I am still running that had a fine tune setting for moonrise/set in easyweathersetup, presumably to allow for daylight saving time!)
In the meantime I’ve temporarily added an hour offset in moon_popup.php so that moon block and moon popup rise/set agree. . . I’ll keep an eye on it.
If WeatherDisplay supports it and it is the clientraw, OK
But otherwise, how would the a script on the webserver know that there is snow at your place?
Wim
479 Snow Inputed into WD ToDay Number 12.700
480 Snow Inputed into WD Month Number 21.590
481 Snow Inputed into WD Season
Snow for the day
Snow for the month
Snow for the season
This may not work if its not in the clientraw.txt
is everybody uploading the other clientrawxx files?
do they manually update those fields as snowdepth and snow for the day?
what to do with the WDapi users?
Then:
Where do we put it? In the rain-block i think.
===
Maybe you should move this question with the remarks so far, to the “wish” topic.
Will not be this season, so we have more time to think and find a good place to put the info.
Is it possible to add it in the rain box but have an option in the block to show snow?
A drop down box, Radio button etc.
Most people who receive snow will input the reading manually.
To add it for next season is okay with me.
Maybe we need more people to comments, How many people add snow on there page.
Thanks Great template
Windgust
K1DED(Amateur Radio)
[li]An update should never contain an easyweather settings file.
Although it is best to make a copy of w34_settings1.php and store it somewhere else, as I can make mistakes .[/li]
After the update always start the settings from the menu and check if there are new questions (the answers are in blue) and check the default setting for that question.
Sorry to report that “rain last hour” is now shown negative in clientraw version, and has yet to appear in API version. First 0.3 mm registered by WD at 1945.
IN http://discourse.weather-watch.com/p/523466
I decided on the mails and messages that the calculation would be CR[100] - CR[109]
Probably I misunderstood as your clientraw.txt shows it should be CR[109] - CR[100] Will be changed tomorrow,Updated w34_livedata.php attached, only for clientraw.txt users needed
Wim
P.S. There is no “rain last hour” in WDapi yet, needs a lot of extra fields to be added.
I suppose “rain last hour” lags behind WD because we have to wait for all the fields (100-109) to be refreshed in clientraw?
And I get -2.9 mm rain last hour at midnight reset - see clientrawrain2. (That may be my fault - I just edited my existing w34_livedata.php file to swap CR[100] and CR[109], I didn’t upload the new file. . .)
P.S. There is no "rain last hour" in WDapi yet, needs a lot of extra fields to be added.
There’s something like it: see APIrain2. That comes from API[43] “raintotal60”.
Thank you, attached a new version of w34_livedata.php to solve this one.
The used clientraw.txt [143] is a logic field, it does not contain a value.
Wim
Thanks for testing. Attached the latest versions of yesterday and today.
When you find a problem, check with Leuven Home Weather Station (wf version) as I am testing also.
That demo-site runs most of the time for Edinburgh to make it “easier” for us to test both.
Wim