i have added this option now to the latest .zip update
it is a lot of data…are you able to get it trimmed?
i have added this option now to the latest .zip update
it is a lot of data…are you able to get it trimmed?
Merci
since you have the sensor number set to 1
it will get allocated as extra temp 1
as shown under view, debug info
there is custom tags for that
e.g %extratemp1% or
%generalextratemp1%.
Ok Brian.
it should be working OK
i have tested here setting to extra temp 2 and that works
what weather station type do you have?
it might be that your weather station data is overriding it
i.e so try setting to allocate to say extra temp 5 (and then use the custom tag to display that)
also what shows under view, debug info
J’ai modifi
Je suis all
Bonjour,
%extratemp1%
not work as in how not work exactly?
example?
you have an extra h in that last custom tag that should not be there
for the record low -100
just reset that value, under action, reset selected all time records
J
I will do some testing here (which I can do because you have your sensor ip available)
Merci.
OK, yes, the %recordlowextratemp1% starts at -100 by default
which is a bug…it should be 100
but you can reset that value
via
action
reset selected all time record values
then click on reset for the extra temp 1 for all time, month and year for minimum
Merci Brian,
Cela fonctionne correctement
Serge
Bonjour,
Malheureusement il y a un autre probl
Bonjour,
J’ai fait plusieurs essais suite au message ci-dessus
Bonjour,
Est-il possible d