In the last half hour it has started raining and cleared to fog - reading now more normal - does rather confirm the fog affect. You can also see what I mean on my site www.greatbosullow.net
Alan
That’s very interesting, on my sensor I don’t believe I have ever seen such a huge difference between PM 10 and the others 8O
Strangely a couple stations in the far west of France and another UK station to the NW of me sometimes show high readings with a west wind - with the proximity to the Atlantic I wonder if the humidity can contain dissolved salt.
Alan
I used to live on the pacific coast and the fog there certainly had salt content.
After few days observation I think the fan is not rotating. Is there any diagnostics (apart from my ear) to tell if it
I think the fan only runs when it is taking readings but I can’t really check as my sensors are quite high up a wall.
And Brian - I would like to use the luftdaten temperature and humidity but the wmr300 produces the indoor values so I guess I need the override. Looking at airquality2.txt the values for TH are there with the sensor described as BME280 as attached.
Best wishes
for 2019
Alan
airquality2.txt (469 Bytes)
Copied from luftdaten FAQ.
Der von uns verwendete Sensor SDS011 hat laut Datenblatt eine Lebensdauer im Dauerbetrieb von ca. 8.000 Stunden. [b]Unsere Firmware schaltet deshalb den Sensor nur f
What firmware are you guys at.
I have set to update automatically.
I think I got a new one last week, had to pull the powerplug to get it going again.
Firmware-version: NRZ-2018-123B
Hi - Yes the firmware is the same NRZ-2018-123B. I have had occasional re-starts - not sure why but I’ve only had to pull the plug once and that was to get the sensor back on the network.
Alan
And Brian - I would like to use the luftdaten temperature and humidity but the wmr300 produces the indoor values so I guess I need the override. Looking at airquality2.txt the values for TH are there with the sensor described as BME280 as attached. Best wishes for 2019 Alan
there should be a airquality3.txt file?
I will need to add override for wmr300 data
[quote author=Weerstation link=topic=67338.msg541485#msg541485 date=1546096434]
Copied from luftdaten FAQ.
Der von uns verwendete Sensor SDS011 hat laut Datenblatt eine Lebensdauer im Dauerbetrieb von ca. 8.000 Stunden. [b]Unsere Firmware schaltet deshalb den Sensor nur f
Thanks Brian
The only files I see in wdisplay are airqualityaqi.inf and airquality2.txt
Alan
you would need to be using the latest
cronairquality.exe version
1.5
modified create/time on that file should be 26 Nov
yes?
Thanks Brian - The cronairquality.exe is dated 26/11/2018 but the version says 1.0.0.0
It was in weatherdisplaytest.zip which I didn’t download until 19/12/2018 I’ll check if there is a later one.
Alan
Hi Brian I downloaded the zip file in Suggestions (26/11/2018) again and still get just airquality2.txt and the cronairquality.exe is also 1.0.0.0
Alan
the version number is shown when you actually open the program (i.e make it visible from the icon from the system tray) but you would need to be fast
anyway, use this test version
backup your current version
and see if it shows a message when its run
http://www.weather-display.com/downloadfiles/cronairquality.zip
is that the correct IP address to get the indoor data?
Hi Brian
Hope the flu is better - all the best for 2019
That IP is the luftdaten sensor for PM / temp / humid and it is the temp & hum which I would like to see instead of the indoors
All data arrives from 192.168.0.161/data.json (the address I have set in purple air set up). I managed to get round the router changing the ip but the selectable ip is handy as my fix doesn’t guarantee a static ip.
Regards
Alan
what should the url be