Thanks Brian,
Have run a test and it’s not quite right.
- If I enter local IP address as 192.168.1.120 in the IP address box (the network address of the sensor unit), 2455820 in the sensor ID box, tick luftdaten type and then click “Test” I get error message “276:error during handshake(2) 0x80090308”. The result shown in Particles 2.5 is “Values” and AQI result is 0.0
The only other box ticked is “Enabled” The number 2455820 I entered is the local sensor number but the same result occurs whether the box is populated or not.
To double check the sensor was working, I accessed the sensor via a browser using that IP and was able to get in to the interface just fine.
- Just in case I misunderstood I tried the URL method suggested by Wim.
As per Wim I entered http://api.luftdaten.info/v1/sensor/14396/ in the IP address field (where 14396 is my Luftdaten sensor ID) and then clicked “test”. This didn’t produce an error message but only returned “Values” and “0.0” respectively.
Hope that helps
Cheers
Nick