The sliding time indicator on the bottom (temps, rain, humidity, etc graph) graph disappears shortly after starting WD 10.37581. It continues to work on the wind direction and windspeed graphs.
–Jon
The sliding time indicator on the bottom (temps, rain, humidity, etc graph) graph disappears shortly after starting WD 10.37581. It continues to work on the wind direction and windspeed graphs.
–Jon
So far, this is working again. The fix, or so it seems, was to go into the graph setup and tick to display the freezing line in the extra options tab. Then restart WD, un-tick the option to display the freezing line ( the line was still showing on the graph even after un-ticking the option), restart WD . It’s been working properly all day since doing this so I am hopeful.
–Jon
Nope! Not solved…irritating the stuffing out of me! #-o
–Jon
screen shot?
Wondering if the tool tip on that graph might be messing with the rendering?
–Jon
ah, you are refering to the vertical line at mouse cursor position?
it was not clear
that is related to if you have in use the freeze line or not
I have tried it with and without the freeze line…it still stops showing after some time.
–Jon
When you say after some time, how long etc
I know it’s not too helpful but the time seems random. Sometimes it is within an hour and other times it is a couple of days…
–Jon
when it happens, is there any error under view, program event log?
There are no messages.
–Jon
Mine is the same, has been for some time, (here) works then stops, the top graph one works but the bottom stops from time to time.
W10 WD 10.375s79
Teal.
Thanks…installed and running. I will let you know. Thanks again.
–Jon
Happy to report that this hasn’t happened again. Looks like you fixed it! Thanks!
–Jon