Rain to date display error

that incorrect date is moving down the each day
so after a few more days, all going well, it will all come correct

Brian
This has been going on for months and has never been correct

The rain chart (last 7 days) is not tracking past 1 decimal place…this is from my station running S81…


not sure what you mean exactly, sorry

The main point I was trying to make is that rain of less than 0.1" will show as 0.0" on the 7 day since only one decimal point is shown…although mine did round up the 0.9" to 0.1"…

ah, got ya
in fact when inches are used, it should change to say .in and not mm
and yes show more decimal places

use the latest .zip update (build 85)

Very nice…looks great and may help with future issues with rain :wink: :wink:


I am surprised no one had noticed that before 8O 8O 8O

Does that work for mm too?

No more decimal places were added for mm
Although I could do that for day if a weather flow station is in use

the latest .zip update of WD should fix the last 7 days rain for when aus 9am reset in use

Brian
possible cause to problem could be as follows… for some reason if data from Davis VP is not downloaded to computer / WD pgm, next time it is downloaded the dates on 7 day rainfall screen are corrupted.


Brian
The monthly / yearly rainfall totals are not showing on screen and rain chart totals


Rain B.jpg

Have Updated to WD 90
No change to previous post
John Y

It’s not very clear to me what part
Of the previous post is still a problem
Note you can set the needed year rain total
Under control panel, offsets and initial rain

Rain for Jan was displayed as it should on main screen when it fell and totals were correct

Brian
7 Day rainfall window problem looks like a problem if computer that runs WD has a power failure, and then turned on some time later


Brian
it has happened again


do you mean this is happening with when WD is getting the history data from the data logger?
(what weather station type again?)

Brian
Could be