Thanks alot for the fast reply, much appreciated.
I basically use for the new sensor the same connection on my datalogger to measure the amount of rain where the old tipping bucket was connected, so that doesnt change.
But the amount is recorded in 0,01mm, so thats different to the old situation and would be great if WD can show that.
And it records the precipitation type.
That wire is connected to another pulse port on my datalogger and reads the frequency.
The output is just a number.
Heres the precipitation type, the name correspond to a number:
Dry= 0
Rain= 10
Snow= 20
Sleet= 30
Freezing Rain= 40
Hail= 50
So ideally there is an extra datafield added to the datafield/cronpakbusnew i think, to show the precipitation type name?
I dont know if the precipitation type can be graphed or use a colour in the precipitation graph, like blue is rain, red is hail or otherwise…?