cloudy cloudy

Author Topic: Data output issue using Raspberrypi v3 B+ and ConsoleWD issue 17.3  (Read 143 times)

0 Members and 1 Guest are viewing this topic.

Offline Redsafety

  • Posts: 2
  • OS/Browser:
  • Win NT 10.0
  • Firefox 59.0

Hi all,
Could I have some assistance in resolving the following:-

I have encountered the same symptoms as senapsys as documented within https://www.weather-watch.com/smf/index.php/topic,61722.msg493599.html#msg493599 In that the data from a Davis weather envoy 6314 via a serial to USB adapter is not being decoded consistently despite experimenting with different comms settings. I have attached two screen dumps of  examples of the data output from ConsoleWD, I have also attached a copy of the config file.
Up to now, I have been using Cumulus for displaying my data and have had no obvious data issues, however now I would like to use weather display using the very new Raspberrypi v3 B+.

Best regards

Offline Weather Display

  • Posts: 83,916
  • Davis VP2
  • New Zealand
  • OS/Browser:
  • Win NT 10.0
  • Chrome 65.0.3325.181
    • Weather Display
Re: Data output issue using Raspberrypi v3 B+ and ConsoleWD issue 17.3
« Reply #1 on: April 12, 2018, 11:04:13 PM »
did you try changing
Davis com method=2  // 1 for regular  2 for special davis serial read
to 1
I will do some testing here  later today

Offline Redsafety

  • Posts: 2
  • OS/Browser:
  • Win NT 10.0
  • Firefox 59.0
Re: Data output issue using Raspberrypi v3 B+ and ConsoleWD issue 17.3
« Reply #2 on: April 13, 2018, 02:22:00 PM »
Hi,
Thank you for the feedback, yes I have experimented with that comms setting if you set it to 1 you  get:-
requesting data
requesting data
and so on

which is the same  as documented by "senapsys"within https://www.weather-watch.com/smf/index.php/topic,61722.msg493599.html#msg493599

Offline Weather Display

  • Posts: 83,916
  • Davis VP2
  • New Zealand
  • OS/Browser:
  • Win NT 10.0
  • Chrome 65.0.3325.181
    • Weather Display
Re: Data output issue using Raspberrypi v3 B+ and ConsoleWD issue 17.3
« Reply #3 on: April 13, 2018, 09:36:57 PM »
I will see if I can improve the situation and get back to you

Offline Weather Display

  • Posts: 83,916
  • Davis VP2
  • New Zealand
  • OS/Browser:
  • Win NT 10.0
  • Chrome 65.0.3325.181
    • Weather Display
Re: Data output issue using Raspberrypi v3 B+ and ConsoleWD issue 17.3
« Reply #4 on: April 14, 2018, 12:41:22 AM »
I have tested here
it works great
(after initial start up where its a bit slow to get going)
then after the first data has arrived, its synced up and flys along nicely
maybe try updating the silicon labs usb driver you have?

 

cumulus