RB Pi3 3, WH1080

hi There,

i am (was) a weatherCat User for years but i sold the livingroom mac and forgot the WH1080 that was connected.
Then i installed WD on an Windows machine (trial) and yesterday all worked perfect.
so i ordered a Pi3 and thought to install WD on Windows 10IoT (but i think this will not work)

now i am Running WD on linux and it seems to work, but i am a little bit confused about the different downloads and configs.

is the WH1080 type 166 (1081) or other(34)?
Ehrn using 34 i see (wrong) date every second on the console,
when using 166 i see correct data but it will not upload (Wunderground)

Windows Version i have to use StationID, here Username?
i Really love the Windows Verison but i want to use the RB Pi3 (coz of energy :wink: )


Opening WH1081
WH1081 opened OK
writing data to WH1081 now
Offset = 5648   N = 22
Indoor temp =22.7
Indoor hum =27
barometer =998.9
outdoor hum =29
outdoor temp =16.1
wh1081 data ok
Total rain =2350.2
WH1081 Data OK
**** updating clientraw extra files
**** updating data logs
Current data 17:39:01: Temperature= 16.1 Windspeed =3.3 Gustspeed =7.2 Direction =180 Humidity=29 Barometer=998.9 Daily Rain=0.0 Rain Rate=0.0mm/min


this seems ok for me…but i want it working correct with wunderground first,
then Hompage

and finally: IS there a client to view realtime Data?
the IOS seems to work
i want to have it also in my Max and on the Raspbery GUI

That was the reason i installed Windows Version first

Thanks

Grobi

EDIT:
the Data reportet to WU ist the old data from 6 hours ago…but no current data

there is the wdpi program
double click that
it should work
as long as the clientraw.txt file is updated OK
WU should work OK
make sure to remove any // and stuff after that from the config.txt file

ok thanks…after last edit it worked…
including WU update
and now also the testtags.php

but: EU Update works also with incorrect PW (only with Station ID)
i used the wrong pw for WU, but it updated…any idea?
Not a problem for me…but i wondered if it only updates via station ID then.

i am missing the different setting froam the windows Version here,
but the client does what it should do

Ho to purchase? and what to to to purchase the Linux Version?

Consolewd is donationware

so…nearly all is running now.

Except of the rainfall data.
i have a WH1080 - and it shows me from wdconsole 10-52 inches rain today, 52 inches for the months
and today its the first day in April with rain…

and is there a how2 how i can stat wdconsole at startup?

Thanks


Weather station type=166  // Irox=59,WMR100=232,WMR200=233,WMR300=235,WMR968=8,WMR918=3,WM918=1,Davis VP=31,Davis WMMII=4, WH1081=166,2310=60,WXT510=190,3600=61,Davis IP=32, OWWfile=71,universal=34,102=meteobridge,weatherflow=72
meteobridge username=                        
meteobridge IP=192.168.0.1       
meteobridge password=                     
latitude=  50.765                /// latitude, e.g -38.375 for southern hemisphere
longitude= 6.722                /// e.g -17idwow5.456 for east of UTC/London
Station name=Wetter Erp
Start up daily rain(mm)=0.0
Start up monthly rain(mm)=0.0
Start up yearly rain(mm)=0.0
Do wunderground=Y //For updating wunderground.com (set to Y for yes, N for no) (every 5 minutes)
Wunderground username=INORDRHE202	
timezone=	(to change the local PC hour used)offset
Direction offset (whole degrees)=0
Barometer offset(hpa)=0
Do clientraw FTP=Y //(set to Y for yes, N for no), uploads every 1 minute
Save logfile=Y   //to save the .txt logfile (set to N to save on disk space)
Logfile metric=Yidwow
Create custom file=Y   //converts the custom tags in a file called wxlocal.html to wx.html
Use this filename instead of wx.html=testtags.php
Use this filename instead of wx2.html=
Use this filename instead of wx3.html=
Use this filename instead of wx4.html=
Use this filename instead of wx5.html=
FTP the custom file=Y    //will FTP the wx.html or filename you set to FTP server specified (clientraw FTP needs to be enabled too)
Units for custom tag file output:
Temp in celsius=Y
Wind in=kph          // options are: mph,kts,kph,m/s (changes the custom tags)
Baro in metric=Y
Rain in metric=Y
run cron files=Y  // set to N to not run the separate cron files
do custom log=N    // set to Y to create an appended logfile from a template (customlog.txt)
custom log out=customlogout.txt
temp offset=                   //C
hum offset=
wmr300 channel number=1
Rain Offset=0.0  //mm
Modified rain gauge= 
universalupdaterate=2

do you mean you want to set the rain totals? (i.e starting rain totals?)

i mean: WD shows rainfall, but the wh1080 doesnt…

i have no odea where the rainfall data is from

do you mean that rainfall is increasing in consolewd when it is not on the WH1080?
or?

yes, this is correct

so in this data output
Current data 17:39:01: Temperature= 16.1 Windspeed =3.3 Gustspeed =7.2 Direction =180 Humidity=29 Barometer=998.9 Daily Rain=0.0 Rain Rate=0.0mm/min
where it says daily rain=
is that increasing when it should not be, or?

sorry…
my imac died and e bougth another one today

correct…
Daily Rain=0.0 Rain Rate=0.0mm/min

it shows today 130,5mm - but we had no rain today

Frank

I am confused

Daily Rain=0.0 Rain Rate=0.0mm/min
that shows no rain but then you way shows 130.5mm of rain..where does it show that?

it seems my probelm was solved by magic dust and magic wand:

i had problems with ETH losses all other day,
had the Pi3 connected with a Ethernet over power connector.

after i moved the pi3 directly to the switch all works fine.
no more rain where i hav no rain, works as designed now