It seems that the data is sent correctly, but unfortunately does not arrive on the site weather undeground, how come?
pi@raspberrypi:~/consolewdfiles $ sudo ./cronwu
WU data to send http://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?ID=ISICILIA97 //WU ID&PASSWORD=xxxxxx&dateutc=2018-02-08+20%3A54%3A00&winddir=212&windspeedmph=0&windgustmph=2&humidity=78&tempf=52.6&rainin=0.00&baromin=30.085&dewptf=46.0&weather=&clouds=&dailyrainin=0.00&softwaretype=WeatherDisplay%3AWD_console_17.0&action=updateraw
Wunderground data send Ok 22:00:00
check how you have set the password etc in the config
and how that is stored in the consolewd.ini
something looks corrupted if that is what the output is saying
This is the weather undeground configuration on the config.txt file
Station name=Barcellona Pozzo di Gotto
Do wunderground=Y //For updating wunderground.com (set to Y for yes, N for no) (every 5 minutes)
Wunderground username=ISICILIA97 //WU ID
Wunderground password=XXXXXX
Wunderground timezone=+1 // e.g 12 for 12 hours ahead of GMT, -12 for - 12 hours
timezone= (to change the local PC hour used)
In the wdconsole.ini file, there is no line covering weather undeground.
After having made the change and started the console, the usual program seems to send the data, but alas’ are not sent, I tried launching cronwu and in this way the data arrive.
you should see the output from consolewd sending it auto show in the terminal window of consolewd
if a manual send updates your WU then that indead was the problem, that line in the config.txt
and you should be OK now
This is the one that sends the consolewd file to the terminal automatically, but on the weather undeground site it does not update, while if I manually start the filme cronwu update as never?
WU data to send http://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?ID=ISICILIA97&PASSWORD=XXXXXX&dateutc=2018-02-09+17%3A48%3A00&winddir=254&windspeedmph=2&windgustmph=4&humidity=78&tempf=53.5&rainin=0.00&baromin=29.834&dewptf=46.8&weather=&clouds=&dailyrainin=0.00&softwaretype=WeatherDisplay%3AWD_console_17.0&action=updateraw
However I will continue to monitor it to see how it goes if it updates or not,
while on cwop and pws it does not update, only on pws updates every hour … is it normal?
Now that I’ve set the meteotemplate fast to NO, now weather undeground communicates the data perfectly every 5 minutes, where’s the problem? Is it possible to have meteotemplate fast and also weather underground every 5 minutes?
i am not sure exactly why there is a conflict
how long does it take for the cron program to update meteotemplate if you run that it in a terminal window?
the data to be sent is only updated at the rate you set in WD
e,g every 5 minutes
so manaully running it will not make it update faster
but how long does it take for a manual update to finish