Problem Rain Peet Bros Ultimeter 2100

Hello Brian,
as I had already warned you last week, the program does not receive rain data from the console of my station Ultimiter 2100,
I tried the file you sent me, but still does not see the rain. How can we solve?

Inside the config.txt file under the heading:
Modified rain gauge =
I have not put any value is correct?

you do not need to put anything for that setting
that setting is only for if you have modified your rain gauge (e.g increased the area)
I will get a version that provides more debug info

So now how can I read rain data via the raspberry?
Do you have any solution to apply to make the rain data read out to the program?
Can I provide you with data or something else to help you?

Thanks for your help

try this update
http://www.weather-display.org/downloadfiles/consolewdtest.zip

your patience is appreciated

it should show rain debug info

Ok thanks Brian, I replaced the file and started consolewd, as soon as it rains, we’ll see if it reads the data coming from the console of the weather station.

Hi Brian,
here this morning it rained and the station console scores 0.25mm, only that unfortunately the rain data seems to read the program,
but do not send it online where it is still 0.0mm as ever?


start of rain code, current index =455
Complete record mode raw rain data 0 0 0 1
raw rain =0.010
New rain ,after adjust 0.3
old rain 0.3
increase in rain to use =0.0
Data OK

see what happens when you get another rain gauge tip

You say I have to wait for it to rain again and increase? To see if it reads the rain …

But why did not you read these 0.25mm that have already fallen?

just let me know if it picks up the next rain tip

Ok but unfortunately today, I’ll have to put it manually because it’s not raining anymore

try this update too
http://www.weather-display.com/downloadfiles/consolewdtest.zip

Ok I try and see just raining if it marks the rain or not.

The rain fell today I put it manually now.

Hello Brian, finally he reads the rain, he does not lose a shot anymore, but I saw that he does not communicate the rain rate and 'normal?

communicate rain rate where ? and not sure what you mean by normal?

I want to say that the clientraw.txt file that is generated by consolewd, does not communicate the rain rate of rain and consequently then on my site that also processes the data of the rain rate, while it rains the rain rate is 0 why?

I will look into the rain rate in the clientraw.txt for consolewd as spare time permits

Ok very kind, so then as soon as you give me the file, we’ll see when it rains if it also inserts the RAIN RATE. Thanks again

re rain rate
try update
http://www.weather-display.com/downloadfiles/consolewdtest.zip

Ok thank you so much I try and tell you if he communicates the rainrate in the clientraw file.

Hi Brian,
I wanted to tell you that I’m trying the new file you sent me to read the RAIN RATE, but unfortunately it still does not read it.