Hello Brian,
as I had already warned you last week, the program does not receive rain data from the console of my station Ultimiter 2100,
I tried the file you sent me, but still does not see the rain. How can we solve?
Inside the config.txt file under the heading:
Modified rain gauge =
I have not put any value is correct?
you do not need to put anything for that setting
that setting is only for if you have modified your rain gauge (e.g increased the area)
I will get a version that provides more debug info
So now how can I read rain data via the raspberry?
Do you have any solution to apply to make the rain data read out to the program?
Can I provide you with data or something else to help you?
Ok thanks Brian, I replaced the file and started consolewd, as soon as it rains, we’ll see if it reads the data coming from the console of the weather station.
Hi Brian,
here this morning it rained and the station console scores 0.25mm, only that unfortunately the rain data seems to read the program,
but do not send it online where it is still 0.0mm as ever?
start of rain code, current index =455
Complete record mode raw rain data 0 0 0 1
raw rain =0.010
New rain ,after adjust 0.3
old rain 0.3
increase in rain to use =0.0
Data OK
I want to say that the clientraw.txt file that is generated by consolewd, does not communicate the rain rate of rain and consequently then on my site that also processes the data of the rain rate, while it rains the rain rate is 0 why?