That’s looking better. I’m now getting Windspeed, Gust and Direction coming in but the Windspeed and Gustspeed are the same.
Barometer is still showing 1013.0
And the temp data is still off.
On Windows and the weather base station it is showing as 0.5C but in consolewd it is showing as -0.5C. Pressure is showing as 1020 but WD shows it as the default 1013
I noticed a discrepancy in temps on the 14C as well.
Also of note. the temp was showing as 3.5C before and after on Windows and on the base station. On the Pi it was showing as 2.5C
Let me output it to a txt file for a few minutes and upload it again.
Thanks.
Current data 10:15:37: Temperature= -0.5 Windspeed =8.6 Gustspeed =8.6 Direction =270 Humidity=98 Barometer=1013.0 Daily Rain=0.0
data read length ->15
01 FF FF 00 42 C1 05 00 62 0A 00 00 20 94 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 FF FF 00 42 C1 05 00 62 0A 00 00 20 94 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 FF FF 00 42 C1 05 00 62 0A 00 00 20 94 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
temperature found, sensor # 0
Temperature data found
send PC ready result 1
Current data 10:15:53: Temperature= -0.5 Windspeed =8.6 Gustspeed =8.6 Direction =270 Humidity=98 Barometer=1013.0 Daily Rain=0.0