the barometer reading of 1013 is just the default reading
I will add some more debug code around the baro data that has come in (e.g the crc error check etc)
there must be some differences with this station type compared to the wmr100 for the data output
which does not affect the windows version
but does affect consolewd
which is due to differences in the way it gets the data
i.e consolewd is looking for certain markers
what I will do is output all the raw data as it arrives
OK I see the problem
the data other than temp/hum is arriving all at once, i.e all in the same data line
and so it needs to be split/teased out (the FF’s divde the data)
BTW, have you/anyone else written a doc on how WD works in terms of how it collects and parses the data? Would be interested to know what the process is and what the numbers mean.
That’s looking better. I’m now getting Windspeed, Gust and Direction coming in but the Windspeed and Gustspeed are the same.
Barometer is still showing 1013.0
And the temp data is still off.
On Windows and the weather base station it is showing as 0.5C but in consolewd it is showing as -0.5C. Pressure is showing as 1020 but WD shows it as the default 1013
I noticed a discrepancy in temps on the 14C as well.
Also of note. the temp was showing as 3.5C before and after on Windows and on the base station. On the Pi it was showing as 2.5C
Let me output it to a txt file for a few minutes and upload it again.
the barometer data does not update very often
it should come in though
re the temperature, maybe you have set a temperature offset in the config.txt file
??
Good spot. The config I was using was the one supplied with the image and had a -1 in temp offset=
I have now removed this and the temp is correct.
So
windspeed & gustspeed are still duplicated with the same value for both
Will wait for the barometer to update until which time I assume it will sit at the default 1013.0 it has updated and is now showing the correct reading.
I’ve uploaded the output from running the most recent version of consolewd to my website:
I’ve downloaded the file consolewd64.tar.gz (Version on 17 January 2018 - 03:20:04) and placed all of the files but I’m still getting the gust and speed mirroring.
I’m piping it into a text file again and will update this thread.
EDIT
Updated output from running the new version of consolewd.
Interesting. The data uploaded to Wunderground is showing a different value for windspeedmph &windgustmph. see this excerpt: We don’t have much wind today so I don’t have much data to go on but I will monitor it and report back.