Currently that is going to be a bit of an issue. It might seem strange, but it’s actually quite a pain to move the gauges around. So even though there’s an obvious spot to put the UV, it’s no small job to get it there :lol:
I’ll add it to the todo list, but it will probably be a couple months before I have time to adjust it (apologies, life is very busy for me at the moment!)
Unfortunately for the time being you may have to chose between the extra temperatures and UV
thank you so much!
using your changes second temperature shows +255 max and 100 min
Changing “input 2” to “input 1” in config.js:
temperature02: {
enabled: true,
title: “Secondo Sensore”,
input: 1
},
in fact, in globals.js it refers to “input 1”:
//Widget Config / Settings
var widgetList = {
apparent: {enabled: true},
temperature: {enabled: true, title: “default”, highLowEnabled: true},
temperature02: {enabled: true, title: “default”, highLowEnabled: true, input: 1}, //input: extra sensor 1
temperature03: {enabled: true, title: “default”, highLowEnabled: true, input: 2}, //input: extra sensor 1
All time you need, Yerren!!
It’s a great job anyway.
If i can I would just suggest you to change, in the future, wind speed and gust bars with a round widget (as in old wdl, to understand); or try to put words “wind” and “gust” outside bars.
Thank you Yerrin your a gentleman and a scholar…just one small issue, the min - max for the indoor is showing between 0 and 1 …have i done something else wrong.
And also, are you aware the rain gauges changed, now it is the yearly rainfall gauge that is first rather than the daily rainfall gauge i.e they changed order from daily, monthly, yearly to yearly monthly, daily
From memory, the indoor temperature doesn’t have high/low data records for whatever reason.
To deal with this, you can disable them for that gauge, by using: highLowEnabled: false. So your whole config for that gauge looks something like:
Hi again Yerren. Again thank you for your prompt response.
The indoor temp does have a high low as it is enabled on my old WDL and is still working. In the interim, i will disable the high low but someday if you do get to look at it that would be much appreciated.
Thanks for that! I must have missed it, as it is called inTemp in the parser I’m using, as opposed to indoor temp.
I’ll let you know when I’ve fixed that up, but it’ll be a little while, assignments galore for the next two weeks!
No panic of course, but if you made changes, did you manage to make the change for the high low for indoor temp or correct the rain gauge order ??? if so then I can reactivate display high low, if not, all is good.