leuven template web page not updating

I have been neglecting my web site for a while and noticed that I am seeing a message “last updated October 21 2017”. The temp and some other variables are correct, but the rain and high and low temps are from oct 21st. I guess my brain is not remembering how I did this back awhile ago.

I’m hoping someone could point me in the right direction.

Bill

Windows 10
WD 10.37s b 44

I did not find a recent or installed Leuven-Template site.
Just http://www.frontrangeweather.net/weather28/ which is using WeatherCat, incompletely installed and has data from the original download, not from a real weather-station.

QUESTION: What is the URL to the site with the Oct 21 data and what weather-program is used?

The WIKI describes the uploads at: en:upload [Leuven-Template 2.8]
Scroll to the bottom at that page and you can select description for the weather-program you are using

Wim

Sorry about that. www. Noahsweather.com

Bill

Upload status at http://www.noahsweather.com/weather28/index.php?p=statusWeatherSystems

The realtime data comes from clientraw and is uploaded Ok and the contents is OK
The 5 minute data is not uploaded by WD since Oct 21.

What you should check.
1. Restart WD
Restart WD and wait 10 minutes if uploading starts normally
2. If not check the settings in WD.
The WiKi explains it (more or less) https://leuven-template.eu/dokuwiki28/doku.php?id=en:uploadwd
As it worked in the past you have to compare the bottom part of that WiKi page with your WD screens. I already attached a screenshot from that page here.

Wim


Thanks Wim,

In my WD upload, I had typed “tags.WD.txt” instead of “tagsWD.txt”.

Thank you for your help.

Bill

I think you now have another probloem.
The file you are uploading http://www.noahsweather.com/weather28/uploadWD/tagsWD.txt is empty.
When I inspect the file I see no data lines at all
http://www.noahsweather.com/weather28/index.php?tags&p=0000&pw=#data-area

The result is that your site has no historical data for today and previous periods.
http://www.noahsweather.com/weather28/index.php?p=historyv3&lang=en#data-area

Wim

This empty upload occurs when WD has no file to process in its “to-process folder”.
This WD folder is most of the times located at C:\wdisplay\webfiles\ but its exact location depends on your install decisions.

Please check

[ol]
[li]If the file WD needs exists at: C:\wdisplay\webfiles\tags.wd.txt [/li]
[li]If it is in the webfiles folder, please check the contents and compare with the original at http://www.noahsweather.com/weather28/scriptsWD/tags.wd.txt [/li]
[li]If it not exist at the WD-webfiles folder copy the file using your FTP program from http://www.noahsweather.com/weather28/scriptsWD/tags.wd.txt [/li][/ol]

Wim

WiKi: en:uploadwd [Leuven-Template 2.8]

Hi
I think the file in C:\wdisplay\webfiles\tags.wd.txt has been over written with the converted version so no tags in it so will need a fresh copy as Wim has said

Harold