Yes, already did this. I changed the default port to 4012, but it makes no difference, you can use any unused port. It was working properly before the camera stopped displaying an image.
For Webcam Capture you'll need to find out the URL of the image created by the camera, each manufacturer is different but on my Hikvision webcam it's: http://192.168.1.125/Streaming/Channels/1/picture
Yes, my URL goes something like this, taken from the Amcrest website for my camera model:
http://192.168.1.101:4012/axis-cgi/mjpg/video.cgi?camera=1
Hope that helps a little. :wink:
Thank you for your help, it looks like I’ve already done what you have suggested with no success. I’ll keep at it though. I think it might have something to do with the firewall.
Dan