Software native RS-232

I have added initial support to get the raw data (I sent you a PM)

Bonsoir Brian,
Je n’ai rien comme relev


Comm1.PNG

Com.PNG

what shows under view, debug info, after you click on connect

J’ai contr


Peut-

Please tell us which Maxbotix you have:

MB7334 or MB7354 or MB7364

?

I see you must have set to log the raw data
under setup, advanced/misc
untick that
so as to not confuse things

Bonjour Niko,

Capteur MB7354

Merci Niko,
Je vais contr

Non

try a new .zip update of WD re the raw data showing under view, debug info, in WD

Brian,
J’ai install


DEBUG.PNG

[quote author=eongibier link=topic=63751.msg512259#msg512259 date=1478683532]
Non

have you clicked on connect (and set the needed com port number) in setup, misc…snow depth tab, Maxbotix setup?

Merci Niko.

Yes Brian.

[quote author=niko link=topic=63751.msg512271#msg512271 date=1478709021]
FTDI should be OK.

If you have a multim

Bonjour Serge

Did you test with the programme du terminal ?

Non Niko avec le : “the voltage on the MB pin 3”