Software native RS-232

Can you try that en fran

Ok,
Je cherche un logiciel afin de faire fonctionner un capteur de hauteur de neige en RS-232 natif.

Merci
Serge

Merci :slight_smile:

Serge is looking for software for a snow depth sensor which has an RS-232 output, and it should generate graphs/charts.

@Serge: Please tell us the make and model of the sensor (marque et le mod

Bonjour,
Voici le capteur que je veux utiliser :
http://www.maxbotix.com/SelectionGuide/outdoor-snow.htm#snow
Je ne veux pas passer par Hobby Board qui n’existe plus, je d

I see that the Maxbotix ultrasonic sensors are available with RS232 output. You can find many programs for collecting and storing RS232 data, for example from Windmill. But if you use a program to collect the data from the sensor I don’t know any way to pass that data into WD. I think you will have to ask Brian to add this facility to WD directly.

Bonjour,
Merci, je vais demander

I have added initial support to get the raw data (I sent you a PM)

Bonsoir Brian,
Je n’ai rien comme relev


Comm1.PNG

Com.PNG

what shows under view, debug info, after you click on connect

J’ai contr


Peut-

Please tell us which Maxbotix you have:

MB7334 or MB7354 or MB7364

?

I see you must have set to log the raw data
under setup, advanced/misc
untick that
so as to not confuse things

Bonjour Niko,

Capteur MB7354

Merci Niko,
Je vais contr

Non

try a new .zip update of WD re the raw data showing under view, debug info, in WD

Brian,
J’ai install


DEBUG.PNG

[quote author=eongibier link=topic=63751.msg512259#msg512259 date=1478683532]
Non