CQCQDX
19 December 2015 23:37
1
Hi to you all
I have made a Dalles 1 wire with 5 temp sensors
And all is working ok into the Dalles 1-wire reader
I have enter the Rom extra temperature 2 Rom till 6 Rom
Save it and all the Rom Nr are on the page
And Why 2 till 6 ?
I have also a extra Davis temp/hum station and tis one is on extra temp 1 !!!
Only if I look into Dalles 1-wire Setup/Info / Extra Temperature/Humidty
All the ROM ID are blank ?? is this normal ?
For info all is working ok
Only its strange that this page is blank (Extra Temperature/Humidty )
Problem 2
Now I want to made a graph from extra temp 5 and extra temp 6
Only the setup into auto scale graphs go to extra temp 4
Have I mist a setup into weather display ?
Weather display 10.37R302
Davis Vantage Pro 2
Greetings Gert
windy2
20 December 2015 07:50
2
Hi
if you could post some screen shots…that will help …
also note sure why you have posted in this section of the forum?
CQCQDX
20 December 2015 13:21
3
Hi Brian
Here are the screen shots
1.jpg = This page is empty
2.jpg = this one is ok
3.jpg = look for the option extra temp 5 and 6 for made a graph
And sorry that I post it into the wrong section of the forum
I was think this was the good section
windy2
20 December 2015 22:14
4
for #1:
the solar settings are now done in the separate 1 wire reader, so do not worry
for the other question:
its always been like that, for the auto scale graph customise, there is no missing setup, so not sure why you are saying that?
CQCQDX
21 December 2015 17:19
5
for #1:
the solar settings are now done in the separate 1 wire reader, so do not worry
for the other question:
its always been like that, for the auto scale graph customise, there is no missing setup, so not sure why you are saying that?
thanks for you answer Brain
all is working ok
and for the Graph
I understand that there is no option for extra temp 5 and 6
no problem
greetings Gert
windy2
25 December 2015 18:16
6
I could add in ability to plot extra temp 5/6 to the auto scale graphs
CQCQDX
25 December 2015 19:04
7
if it is not to much work … ok for my
thanks Brain
merry Christmas
windy2
25 December 2015 19:42
8
I will look at adding that over the coming days
windy2
26 December 2015 00:49
9
try this update
http://www.weather-display.com/downloadfiles/weatherdisplaytest.zip
where I have added ability to plot extra temp 5 through 8 and or extra hum 5 through 8
for the auto scale graphs custom, Customise extra temp/hum#1
note: data is not retrospective (i.e from when you start this WD update onwards), and is for last 31 days only
CQCQDX
26 December 2015 23:13
10
thanks Brain
I have install it and busy to test it
thanks for made this so quickly
later on you will here the results
greetings Gert
windy2
27 December 2015 02:38
11
I could make it so that its also saved as month files