1Wire equipment Poll

Just wondering how extensive the use of 1Wire kit is?

I have some 1 wire temp sensors, but I don’t use them with WD.

(Made it sticky so it doesn’t get lost.)

Solar Sensor

Solar sensor and Lightning Detector.

All from Hobby Boards…
Lightning counter
Temperature sensor
8pt relay board

Everything 1 wire:
Wind speed & direction - old AAG unit showing its age
Spare wind speed & direction for when AAG dies - ADS with Hobby-Boards anemometer board
Solar sensor - Hobby-Boards
Spare solar sensor for when HB unit dies - Sheepwalk Electronics (SWE3 module minus humidity sensor and with added resistor and photodiode)
Humidity sensor - Sheepwalk Electronics
Barometer - Hobby Boards
Air & soil temperatures - waterproof 1 wire sensors from Sheepwalk Electronics
Rain gauge - tipping bucket with HB Dual Counter

Hobby Boards - 6 way hub, barometer, indoor+outdoor temperature/humidity, solar sensor, lightning detector
Rainwise - rain gauge with thermistor controlled heating to melt snow and/or prevent ice in the tipping buckets
AAG wind instrument x 2. Just changed over to my spare. Original had been up 8 years :smiley:
Cups on anemometer and fin on direction very brittle and corrosion on some reed switch wires giving faulty readings.
I have some spare bearings but the originals still run very freely.
I somehow need to make replacement cups. A 3d printer would be nice :lol:
Currently trying to work out why I’m getting faulty humidity readings. Maybe I will have to get my wallet out and buy 2 new HIH-4000 sensors at about £20 each, but looking for a cheaper solution first.
Pics - snow covered in 2010, self regulating heater cable fitted in 2012, broken after 8 years use.