Support for new Oregon Scientific WMR-89

i have the history data working now
(turn the switch on under control panel, data logger)
the station only stores data every hour (1 week storage)
latest .zip update
currently beta

Brian, just to give feedback on the rain issue. I have monitored over the last few days, using a glass jar rain gauge for comparison, and the measurements seems pretty spot on so thank you for that.

Hello,
but importing tha data by a data logger all parameters are ok while the rain data are not read? i have to make any changes in the settings?

thanks
Francesco

which version/build of WD?

Hi,
the last version 10.37s70

I might have fixed that, try a new .zip update of WD, ready now

hi , now is perfect for the rains data. My last question is the offset of a barometric pressure. I have put +20mb for reading the correct value on line, but when i read the data logger the value mesured is plus +40.

Thanks for your support

is it always 2x?

yes, but only reading the data logger, after the value read directly from the wmr89 online is correct.

Brian
After having the first full sunny day without a cloud since purchasing the WMR-89 the UV sensor (UVN800) on my console was registering 5. WDL was displaying 0. I followed your guide on the sensor but still cant get WD to show the readings from the sensor. Also the present conditions were showing overcast and gloomy/dry when in fact it was full sun. Not sure what I’ve changed to cause this but I don’t seem able to correct it.


note that UV is not going to give you a solar wm/2 reading, which is what the solar % needs
are you using the update version where I added uv support?

I am on V10.37S70, I will check if this is the latest. I just need the UV to fill in the UV on WDL as in the screenshot, above, as it did previously.

Hi Brian, the update fixed the UV readings, as in the screendump, but the current conditions are wrong, this is something I have changed when trying to resolve the UV problem but for the life of me I can’t get it back.


what I could do is use the UV reading to estimate solar wm/2 to use for the solar conditions

That would be brilliant, thank you Brian.

OK
try a new .zip update of WD, ready now

I’ve installed the update I just now need to do some reading to see how to set this up. thanks for your time Brian, appreciated.

Hi!
I am from Slovenia and i received yesterday brand new WMR89. I have downloaded latest version of WD but my data are not shown on WD. I am try everything to collect data but no luck. On my computer under device manager is notice that there is found WMR89 and there is problem because cpu can not find driver for WMR89. I am also checked that windows is not
powering down the usb port. I am running win7 . Any idea what is going wrong?
And a question is WMR89 rain gauge and other outside sensors compatible with WMR200 console?

The page is under: www.s52sk.com/wmr200/wx.html

CS Marco

Hi
try first getting the software that comes with the station working (as that might then setup the driver correct etc)

Hi Brian!
I did not get any CD or software with. Just station and instruction manuals…
Have you any link to download from?

Marco