The one I upgraded is located in a remote place, so I can not visit it easily, so I am hoping you will find a solution.
I just did the libhid and libusb compile on this upgraded raspbian OS but exactly the same behaviour. No data apart of that unreal barometer reading:
~/consolewdfiles $ sudo ./consolewd
Station type raw=59<
Station type =59
Weather station type is an Irox
Davis com method d
OWW file location= ←
program location= /home/pi/consolewdfiles/<-
Davis VP IP data logger port= 22222<
Davis VP IP data logger IP= 192.168.2.3<-
Station name =My station
Daily rain startup= 0.0
Monthly rain startup= 0.0
wunderground username =
wunderground password =
wunderground utc =-5
Dir offset= 0
Barooffset= 0.0
Comport is USB to serial
Davis com method d
Yes Revb Davis VP
Davis rain gauge .01 inch
mysql username =
mysql server =
mysql databasename =
mysql tablename =
Will do mysql metric
mysql time interval = 300
cwop station id =
cwop call sign = -1 // -1 is default (you do not have a Ham call si
cwop latitude=
cwop longitude=
FTP server =
FTP username =
FTP port = 21
FTPremote dir =
Will do ftp passive
remote file =
FTP time interval = 60
wu =Y
Will save logfile
logfile metric
Custom file name = wx.html
Custom file name 2=
Custom file name 3=
Custom file name 4=
Custom file name 5=
Tag units in celsius
wind units = kts
baro metric= Y
rain metric= Y
Will run cron files
Custom log out = customlogout.txt
temp offset raw = <
wmr300 channel =1
utc hour=18
local hour=20 Weather Display vers WD_console_12.3
If use this program,then please consider sending a PayPal donation to [email protected] (Brian Hamilton)
to help with costs, and support, thanks! www.weather-display.com
Irox opened OK
irox write 5
irox read -1
irox read -1
irox read 34
Raw irox baro 4095.9
irox read -1
irox read -1
I have tested consolewd 64 bit version on my raspberry pi, 3 which is a recent version
4.1.18
and it works with my Irox station OK
I wonder if the problem you have is related to the raw barometer being out of range
I could try updating my OS to 4.1.19
but have you tried re compiling libhid , as per the original setup?
I am running: root@raspberrypi:~# uname -a
Linux raspberrypi 4.1.19+ #858 Tue Mar 15 15:52:03 GMT 2016 armv6l GNU/Linux
and its an older PI 2 only.
I recompiled both libhid and libusb following the instruction shown on the first page of this post. It did not help.
Back in 2 years ago, I did not compile the libhid and libusb, as I recall, you shared these and i just downloaded from your site that time, but never compiled then. i just tried to recompile only now.
done that…
it went through the process
I even rebooted
but its still 4.1.18
and consolewd still works
maybe the 64 bit OS has not been updated?
I could try updating my raspberry pi 1
yes, it can be that the 64 bit variant is running a bit behind or like with some other linux distros, maybe some application is preventing you to upgrade it.
OK lets see with the older one.
pi@raspberrypi ~/consolewdfiles $ pwd
/home/pi/consolewdfiles
pi@raspberrypi ~/consolewdfiles $ ls -la clientraw.txt
-rwxrwxrwx 1 pi pi 0 Jul 9 09:55 clientraw.txt
pi@raspberrypi ~/consolewdfiles $
please note that unit dont have the water / wind sensor unit connected(battery died some month ago). Only the outside temp sensor unit is connected via wireless link.
OK, the data is synced OK, the 5A at the start is what is to be expected
the barometer data is this data:
FF 22
FF 23
which are both NULL 255
which points to a hardware issue with the barometer (its basicly out of range/not working or similar)
and because of that , the program is ignoring all the other data
(I could make this special version carry on so you at least get outdoor/indoor temperature?
OK, I thank you million times, and now we all know that if some of the data is missing because of disconnected units or faulty sensors we have such issue. Actually now I will use this test variant, as I really like this way, if i lose connection to some of the wireless sensors, I will still have data to monitor.
Image shall fit onto 8 GB SD card (this is where I created it from) but I suggest to use a 16 GB instead. Username/pass are RPi default (pi/raspberry). SSH is enabled.
I just download it, and the only thing it has is a file. Here is a screen shoot . Maybe I’m doing something wrong.
What version of the Pi is this image for?