Brian,
i did restart the raspberry but all the time same issue, barometer is crazy reading and nothing in here
pi@raspberrypi ~/WX $ ls -la clientraw.txt
-rwxrwxrwx 1 pi pi 0 Jul 7 21:11 clientraw.txt
pi@raspberrypi ~/WX $
I can not restart the IROX as it is in remote, also I can not rewrite the SD card image to an old raspbian.
I am pretty sure the raspbian upgrade killed it.
Is there a way to make it work with the lastest raspbian? Are you aware of that issue that if someone upgrade the OS, it stops working?
Can you please make a test or what should i try to do to give you some debug info? Many thanks
w interface driver hub
[ 0.601025] usbcore: registered new device driver usb
[ 0.607036] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47
[ 0.642715] Switched to clocksource stc
[ 0.696270] FS-Cache: Loaded
[ 0.699593] CacheFiles: Loaded
[ 0.718003] NET: Registered protocol family 2
[ 0.723933] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.731124] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.737756] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.744400] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.750299] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.757007] NET: Registered protocol family 1
[ 0.761972] RPC: Registered named UNIX socket transport module.
[ 0.768023] RPC: Registered udp transport module.
[ 0.772797] RPC: Registered tcp transport module.
[ 0.777531] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.785245] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[ 0.794385] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.816731] VFS: Disk quotas dquot_6.6.0
[ 0.821103] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.830761] FS-Cache: Netfs ‘nfs’ registered for caching
[ 0.837533] NFS: Registering the id_resolver key type
[ 0.842834] Key type id_resolver registered
[ 0.847058] Key type id_legacy registered
[ 0.854890] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.862881] io scheduler noop registered
[ 0.866882] io scheduler deadline registered (default)
[ 0.872462] io scheduler cfq registered
[ 0.878861] BCM2708FB: allocated DMA memory 5b800000
[ 0.884034] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.894582] Console: switching to colour frame buffer device 82x26
[ 0.905847] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[ 0.914741] KGDB: Registered I/O driver kgdboc
[ 0.921898] vc-cma: Videocore CMA driver
[ 0.927644] vc-cma: vc_cma_base = 0x00000000
[ 0.934043] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.941024] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.948308] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.978841] brd: module loaded
[ 0.992655] loop: module loaded
[ 0.998545] vchiq: vchiq_init_state: slot_zero = 0xdb880000, is_master = 0
[ 1.009087] Loading iSCSI transport class v2.0-870.
[ 1.017230] usbcore: registered new interface driver smsc95xx
[ 1.024835] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.232417] Core Release: 2.80a
[ 1.237195] Setting default values for core params
[ 1.243578] Finished setting default values for core params
[ 1.450862] Using Buffer DMA mode
[ 1.455798] Periodic Transfer Interrupt Enhancement - disabled
[ 1.463266] Multiprocessor Interrupt Enhancement - disabled
[ 1.470415] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.476408] Dedicated Tx FIFOs mode
[ 1.481861] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024
[ 1.494990] FIQ FSM acceleration enabled for :
[ 1.494990] Non-periodic Split Transactions
[ 1.494990] Periodic Split Transactions
[ 1.494990] High-Speed Isochronous Endpoints
[ 1.518172] dwc_otg: Microframe scheduler enabled
[ 1.518301] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03dd8e0
[ 1.525881] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03ddbbc length 36
[ 1.533793] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc896000
[ 1.541522] dwc_otg 20980000.usb: DWC OTG Controller
[ 1.548186] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.557221] dwc_otg 20980000.usb: irq 32, io mem 0x00000000
[ 1.564464] Init: Port Power? op_state=1
[ 1.569935] Init: Power Port (0)
[ 1.575063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.583520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.592330] usb usb1: Product: DWC OTG Controller
[ 1.598630] usb usb1: Manufacturer: Linux 4.1.19+ dwc_otg_hcd
[ 1.605970] usb usb1: SerialNumber: 20980000.usb
[ 1.613264] hub 1-0:1.0: USB hub found
[ 1.618704] hub 1-0:1.0: 1 port detected
[ 1.624803] dwc_otg: FIQ enabled
[ 1.624826] dwc_otg: NAK holdoff enabled
[ 1.624841] dwc_otg: FIQ split-transaction FSM enabled
[ 1.624906] Module dwc_common_port init
[ 1.625450] usbcore: registered new interface driver usb-storage
[ 1.633519] mousedev: PS/2 mouse device common for all mice
[ 1.641688] bcm2835-cpufreq: min=700000 max=700000
[ 1.648487] sdhci: Secure Digital Host Controller Interface driver
[ 1.656293] sdhci: Copyright(c) Pierre Ossman
[ 1.662602] sdhost: log_buf @ db813000 (5b813000)
[ 1.742801] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.750460] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.778682] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.786646] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.794028] usbcore: registered new interface driver usbhid
[ 1.801192] usbhid: USB HID core driver
[ 1.811147] Initializing XFRM netlink socket
[ 1.817471] NET: Registered protocol family 17
[ 1.823783] Indeed it is in host mode hprt0 = 00021501
[ 1.891814] Key type dns_resolver registered
[ 1.904446] registered taskstats version 1
[ 1.910544] vc-sm: Videocore shared memory driver
[ 1.917154] [vc_sm_connected_init]: start
[ 1.924264] [vc_sm_connected_init]: end - returning 0
[ 1.933452] Waiting for root device /dev/mmcblk0p2…
[ 1.950479] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.963712] mmc0: new high speed SDHC card at address b368
[ 1.971669] mmcblk0: mmc0:b368 AF SD 15.1 GiB
[ 1.979775] mmcblk0: p1 p2
[ 2.052833] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.062013] Indeed it is in host mode hprt0 = 00001101
[ 2.131072] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.142703] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.160791] devtmpfs: mounted
[ 2.166763] Freeing unused kernel memory: 348K (c0771000 - c07c8000)
[ 2.283300] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.292043] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.303813] hub 1-1:1.0: USB hub found
[ 2.310822] hub 1-1:1.0: 3 ports detected
[ 2.592943] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.723347] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.732247] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.755540] smsc95xx v1.0.4
[ 2.839184] smsc95xx 1-1.1:1.0 eth0: register ‘smsc95xx’ at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5c:4d:18
[ 2.952891] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 3.088886] usb 1-1.3: New USB device found, idVendor=1130, idProduct=6801
[ 3.097930] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.107233] usb 1-1.3: Product:
[ 3.129487] hid-generic 0003:1130:6801.0001: hiddev0,hidraw0: USB HID v1.10 Device [ ] on usb-20980000.usb-1.3/input0
[ 3.836950] udevd[156]: starting version 175
[ 6.081529] bcm2835-rng 20104000.rng: hwrng registered
[ 8.102840] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 10.575039] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.966272] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 17.304855] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.648512] random: dd urandom read with 108 bits of entropy available
[ 20.455918] smsc95xx 1-1.1:1.0 eth0: hardware isn’t capable of remote wakeup
[ 21.956644] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x51E1
[ 22.514210] random: nonblocking pool is initialized
[ 30.605222] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:507900k SSFS
[ 40.444090] uart-pl011 20201000.uart: no DMA platform data
[ 44.463466] fuse init (API version 7.23)
[ 130.526073] usb 1-1.3: usbfs: process 3112 (consolewd) did not claim interface 0 before use
[ 130.526556] usb 1-1.3: usbfs: process 3112 (consolewd) did not claim interface 0 before use
[ 130.526949] usb 1-1.3: usbfs: process 3112 (consolewd) did not claim interface 0 before use
root@raspberrypi:~#
root@raspberrypi:~# lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 1130:6801 Tenx Technology, Inc.
root@raspberrypi:~#