Woody,
It looks like he is located in Germany…
[email protected]
–Tim
Hi,
before the mebus/honeywell i owned a ws2300 station.
The Mebus looks better than the LaCrosse WS2300. The Windsensor is much better 
The sensors works fine, even the UV Sensor. The Main Unit stores 200 records and is linked via usb to the pc. Memorysaving interval is 1 hr without a pc. The intervals for the senors are:
tHERMO-hYGRO 47 sec
Rain 183 sec
Wind 33 sec
UV 300 sec
Inddor 10 sec
And yes it is true i am from Germany on a small island called Juist in the northsea. The island is about 500 meters wide and 17 km long.
i have added support for this station now,via the software that comes with it (you need to select that output file records.txt, after first ticking to use this station type (in the 2310 station type tab))
in a new 10.34L zip, download in a few hours from now
I just download the new file, but where is the stationtyp hide? Where is the tab for the input file?
in the la crosse setup, right down the bottom of that setup screen…
http://www.tokaanuskihire.co.nz/WeatherD.zip
that zip version is not doing the data jumps anymore #-o
( i hope, i will leave running, as I have to head out now)
update, yup, thats fixed that issue 
It is like a wonder, the jumps are gone.
Thanks for that great work. One little think (i hope so) is not perfect working, but i hope you will fix it also.
Again thanks a lot for the fast help.
Roger from the otherside of the world
hi
yup, got your email about the wind direction and how its 1- 16
i have fixed that now…and am uploading a new 10.34m version…
download that in a few hours from now 
also, how much does the rain gauge measure by?
i have it at the moment being 1mm tips
A great Thank you to Brian !!!
I was very pleased and had great fun when i started the new 10.34m!!!
The major Bugs for the Honeywell TE923W / Mebus TE923 in Germany like the bumping Graph and the funny Wind direction where gone with the wind ;.))
I asked also other Software Companies ( Amb… etc.) if they could support the Honeywell / Mebus Station, but they didn`t do that. Only Weather Display did it! And you did it in a very fast time!!! For this nightrobbing work again a big T H A N K Y O U !!
I also posted that in our german forum. I hope many other Honeywell & Mebus Station User will use Weather Display.
I will stay in touch with you for some minor changes.
regards
Roger
Hi
thanks for the thanks !
I will get a revision up now for the rain to increase by 0.7mm per tip instead of 1mm
Hi all,
i have the Mebus TE923 too, but still having Problems with the rain display.
I selected the TE and put in the path to the record.txt. But nothing happens.
All counters are 0 (Zero). Temperature, Windspeed, Direction etc. are OK.
The weathercapture 1.2 and the program that comes with the Mebus shown
the correct rainfall.
What can i do that weatherdiplay takes the rainfall from the record.txt ?
Regards Lutz from Germany
you have to set the starting values for rain totals to date in WD initialy, in the barometer offset/initial rainfall setup
then WD will use the rain found and add to those starting values
(but there is still a problem with the rain values i think being added ? (its hard to work what the values are in the record.txt file)
Hmm, i am not sure if i understand you, ok i can manually insert the data for rain today, yesterday, last week etc.
But if we have new rain here WD will not add the data.
This is a link to the latest record.txt from weathercapture 1.2 http://ibl-germany.de/records.txt
:lookslikerain:
hi
WD uses the data from column 26 as rain data…
is that data behaving itself in the records.txt file?
edit…its not…its always 999, for all the rain columns…so that is the problem there…for some reason, the honeywell softare is not recording the rain correctly in the records.txt file
For some reasons i don`t know, Weathercapture hangs up sometimes and all data are lost in space or elsewhere. Maybe you can get in touch with the Honeywell-guys or the german Mebus support ( they are very friendly!!!)
Hi from the german north sea,
i just get a copy of " PC-Wetterstation" from Werner Kern. His Version 2.92.5 supp
sure…give me some examples…i.e where in the data the rain is, etc…
i doubt a station manufacture would help a 3rd party software with direct communication…thats very rare
Is it possible to have weather display upload the information without the weather capture program that came with the honeywell TE923 hardware?? Every time I run that weather capture program my computer locks up or becomes extremely laggy. So I was wondering if you can upload the information without the weather capture program. Otherwise I can’t use your program?? Could you possibly look into this for me??
Thanks,
Brandon
what i would is as much information as possible about how the station works…data protocols, etc…web sites for info…and someone would have to work with me using a logging of the data that occurs back and forth, e.g with a com spy…
Brian,
I have the same problem with the rain data not updating in WD. The data itself is updating in column 26 in the record.txt file but is still appearing as 0mm in WD. You’re right about WeatherCapture 1.2 program is behaving strangely as the rain data for last 24 hours, yesterday etc. are all with 999 values. But as said, the actual rain count in column 26 is updating correctly.
Will you have a look at it please, or is there anybody who has a brilliant trick up the sleeve? Is there a program that makes a correct records.txt? Will the old WeatherView do the job?