Ooop’s, Ooops again. I installed a 12 volt lightbulb in my rain gauge to melt snow so I can measure it. In the process, I inadvertanly tripped the bucket several times. I had tallied up about half an inch of rain before I was finished. I tried correcting this info, but it keeps resetting to the erroneous rainfall value. I thought I was in the right place to correct it. I clicked on the rainfall display on the main page; a window pops up that gives you the option to correct/reset the values. The correction on the daily value worked, but the monthly value kept reverting to the erroneous value. Any tips on what I’m doing wrong. Do I have to wait until the end of the month to reset it?
Thanks for any help.