Hello all from a very wet Houston Texas. Thanks to the good Lord my family is high and dry. Please pray for all of my fellow Texans that are suffering.
I have tried searching for the answer but due to the lack of sleep it’s very hard to concentrate. I am running WDL 10.37 build 56 and I need to adjust the rain totals for yesterday but each time I make the change it will not save. Can someone please explain the proper way to make this change?
I am going to Action, View modify log file /rain totals, load the data file, I scroll to day 28 and enter the corrected value, then hit save the changes in the lower section of the box, then I press use the corrected amount then ok. What am I doing wrong?
that should work
if you could .zip and email me your data file
month82016.inf
and I will test/check here
I did mean this year :oops: #-o
the problem is with the power cut and the missing data
the solution is to put in the missing data around the midnight reset time , and the needed rain total for the day, in the logfile, 82017lg.txt, and then convert that logfile to data file
(see under action, convert WD logfiles to data files)
here is an example, for 3 inches for day 28
28 8 2017 21 21 69.9 97 69.0 29.714 0.0 0.0 146 0.000 2.670 19.882 38.150 63.4
28 8 2017 23 55 69.9 97 69.0 29.714 0.0 0.0 146 0.000 3.000 19.882 38.150 63.4
28 8 2017 23 56 69.9 97 69.0 29.714 0.0 0.0 146 0.000 3.000 19.882 38.150 63.4
28 8 2017 23 57 69.9 97 69.0 29.714 0.0 0.0 146 0.000 3.000 19.882 38.150 63.4
28 8 2017 23 58 69.9 97 69.0 29.714 0.0 0.0 146 0.000 3.000 19.882 38.150 63.4
28 8 2017 23 59 69.9 97 69.0 29.714 0.0 0.0 146 0.000 3.000 19.882 38.150 63.4
29 8 2017 0 0 69.9 97 69.0 29.714 0.0 0.0 146 0.000 0.000 19.882 38.150 63.4
29 8 2017 0 1 69.9 97 69.0 29.714 0.0 0.0 146 0.000 0.000 19.882 38.150 63.4
29 8 2017 5 52 69.9 97 69.0 29.714 0.0 0.0 133 0.800 4.173 21.386 39.653 63.4