Hardware Error HB 1 wire Lightning sensor Fixed

Hi

Is it possible when you have a moment to have a look at
the 1 wire Hobby boards Lightning sensor settings

It’s not be working for some time,

Just updated to the latest version
No data is going to the log files
And the graph is not working for the Lightning data

If not not possible it’s ok

Mick

can you post a screen shot of your settings and what shows in the separate running 1 wire programs etc

Are you sure the battery doesn’t need to be replaced?

hi

please see all attachments in 3 poates 1 off 3



wdl2.jpg


the first image is the important one
it shows a count of 1
does that increase?

Hi

No it is not increasing

then that means a hardware issue (battery?)
or that maybe it needs to be set to use page 14 for the counts

ok will check sensor out ,
I have a sensor spare will put them on a bench test metre

Thanks for info

Hi Brian and everybody

It was an error on the battery one of the terminals has corroded so am going to modifies server the battery connector connects to a screw terminals
which would make it better than the flimsy 9 V connector

Will update with a picture when conversion finished

Thank you for your help