Hi
Is it possible when you have a moment to have a look at
the 1 wire Hobby boards Lightning sensor settings
It’s not be working for some time,
Just updated to the latest version
No data is going to the log files
And the graph is not working for the Lightning data
If not not possible it’s ok
Mick
can you post a screen shot of your settings and what shows in the separate running 1 wire programs etc
Are you sure the battery doesn’t need to be replaced?
hi
please see all attachments in 3 poates 1 off 3
the first image is the important one
it shows a count of 1
does that increase?
then that means a hardware issue (battery?)
or that maybe it needs to be set to use page 14 for the counts
ok will check sensor out ,
I have a sensor spare will put them on a bench test metre
Thanks for info
Hi Brian and everybody
It was an error on the battery one of the terminals has corroded so am going to modifies server the battery connector connects to a screw terminals
which would make it better than the flimsy 9 V connector
Will update with a picture when conversion finished
Thank you for your help