FTP error

CWOP is not updated via FTP
and I think you are refering to the clientraw.txt file for the other question, which is uploaded with the clientrawrealtimeftp.exe

if you could .zip and email me your settings files

I’m sorry, Brian, but i’m not sure where the ‘settings files’ are located. I looked in the WD directory and in the program itself, but can’t find it. Thanks in advance.
steve

Will this help? It’s the FTP log.
steve


FTP error log.txt (24.1 KB)

there is a FAQ on how to send me the settings files

425 Could not open data connection to port 57921: No route to host 141: FTP protocol error: 425 Could not open data connection to port 57921: No route to host Changing back to original dir for this file

you could try setting to use passive mode in the connection setup in WD

also it looks like you have set to use a different remote directory for each file, not sure what you would want to have that in use
(check to see if you have that set in the upload times for each file in the customise internet and file creation setup)

Brian,
Here is the zipped file (thank you for the instructions), and I’ll play with the other suggestions you had.
Steve

Moderator Update: Attachment deleted, you do not want this information displayed publicly. Please email it as instructed in the FAQ.

make sure to email (zip first) the settings files
and not to post them on a public forum for anyone to download :wink:

Hi
ok, I have your settings files
to fix the error with the upload (error with port)
you need to tick, use passive mode, in the connections setup

also in your settings I see you have set to use the #2 real time clientraw upload…but its uploading to the same FTP server

also I see you have set to upload the files to a different FTP server in the customise internet and file creation setup ?

also I see that you have a remote directory set for some of the files in the customise internet and file creation setup (in the upload times)
but that remote directory is the normal remote directory

remove all those
so as to avoid:
Changing to new remote directory for this file
CWD /weather

Brian,
Please see if the following screen shots do what you said in the post before your last one.
I’m still trying to figure out your last post. :).
In the FTP shot, I unchecked 2nd Real time… which I assume was the duplicate
in the Connections shot, I checked ‘use passive mode’
so far so good?
steve


yes, that is what I am meaning
(and then you can exit the running 2nd real time ftp program)

Yes, there was always 2 FTP programs running… who know why I did that. Anyway, my web page is still not functioning. It’s a blank page.
thoughts?
thank you again for your help.
Steve

with the change to use passive mode, what now shows in the ftplogfull.txt

also
remove the remote directory you have set
in the upload times
for the file #1 , in the customise internet and file creation setup

also its odd that all the upload switches are off in the customise internet and file creation setup
you could also try turning off the override switch there

another question
for your web site, who is/what is the name of your FTP host?

as you had a 2nd ftp server set up as
upload.comcast.net
but your main FTP server is
www.jstevengibsondds.com

but yet your web site is at http://my.xfinity.com ?
anyway, I will test a Office.htm upload here and see if that shows up at the above url

OK, uploading Office.htm to www.jstevengibsondds.com
does not show up at
http://my.xfinity.com/~oreokid24/weather/Office.htm

are you sure you have the correct FTP server setup?

this web site works
http://www.jstevengibsondds.com/weather/Office.htm

and shows my test upload
(the other URL I got from your forum profile (as you had not provided the URL to your web site)

the web site
http://www.jstevengibsondds.com/weather/Office.htm
works when I set the upload here
but when I exit WD, and check later, that web site is blank, which must be from your upload

what shows in your ftplogfull.txt file?

Attached is the ftplogfull.txt
Now WD on my android hasn’t updated since yesterday afternoon. There is no more wdteather icon on the task bar. no WeatherBug icon either. I have my comm port set to release for 5 min every morning, but nothing is going over to my WL software. However, that has been happening since I’ve had issues with the FTP.
But other than that… :slight_smile:
Steve
ps. I had failed to update my profile for the forum to my new web site (but did put it on the original post for this topic)
Again, Brian, thank you for your help.


ftplogfull.txt (2.45 KB)

227 Entering Passive Mode (50,62,24,129,196,226) STOR autoscaletemphum.gif 150 Accepted data connection 226-Error during read from data connection 226 Transfer aborted

that looks like a possible permissions problem on your server
you could try deleting that file and the other autoscale graph file on your actual server

re android, do you mean some app on that?
I did notice that the 2nd real time ftp upload you had set to upload to a different remote directory instead of the /weather one

One of the uploads went to /weather/live and the other went to /weather
I use the WD app on my android (WDlive), but it isn’t updating since yesterday.