So, I finally got my Vantage Vue with the data logger here, installed everything, console is talking nicely to the ISS and weatherlink software connects to the station via Com port 10.
WD is set to Com port 10, Vantage Vue station and during startup, it seems to pull the day/time just fine and then does not get any data nor does it display any data like temp, humidity etc. The “Data received” light blinks, but the count stays at zero.
Any thoughts on how to troubleshoot this? I am running out of ideas. Am using Windows 7 with the latest WD version 10.37S
Is it a USB logger? If you ran weatherlink then the logger has probably been set to USBXpress mode that WD can’t handle. There should be either a menu item or utility program with weatherlink to reset the logger to com port mode
It is the USB data logger that has the virtual COM port (set to COM 10, 19200 Baud here)
The latest driver from silabs.com has been installed, device detection works flawless
Weatherlink is configured for COM 10, Serial port (NOT USB Express) and it is working fine (means it is downloading data and has no communication issues)!
Based on Weatherlink working fine in Serial Port (COM 10) mode, I doubt that it is a hardware related problem
WD seems to detect the station (“Data History Extraction” window shows up and has the bar showing the download progress)
Still ZERO data is being displayed in WD. Never thought there would be that much trouble with one of the most common weather stations
Even the WD debug log of WD shows that it talks to the console:
Doing checking of time zone calculation
Daylight saving in use
Loaded all time records
connected OK to com port 10
restarting timer
connected OK to com port 10
*sending DMPAFT
Asking for archived data download
Davis VP Retrieving data from: day 20 month 7 year 2017
Retrieving data from: hour 6 minute 57
ask for time/date of record…
1 6 1
1 3 2
1 0 3
1 0 4
1 0 5
1 155 6
1 220 7
Sending OK…
***formating data
Time :06:58
Date :20/07/2017
***formating data
Time :06:59
Date :20/07/2017
***formating data
Time :07:00
Date :20/07/2017
***formating data
Time :07:01
Date :20/07/2017
*formating data
Time :07:02
Date :20/07/2017 finished data block sending OK after 5 blocks of data
***formating data
Time :07:03
Date :20/07/2017
***formating data
Time :07:04
Date :20/07/2017
***formating data
Time :07:05
Date :20/07/2017
***formating data
Time :07:06
Date :20/07/2017
*formating data
Time :07:07
Date :20/07/2017 finished data block sending OK after 5 blocks of data
***formating data
Time :07:08
Date :20/07/2017
Aborted
All data downloaded or did not sync correct!
Clearing records
formating the VP data
vp data read in 11
VP data Date:= 20/7/2017
VP data Time:= 6:58
VP data Date:= 20/7/2017
VP data Time:= 6:59
VP data Date:= 20/7/2017
VP data Time:= 7:0
VP data Date:= 20/7/2017
VP data Time:= 7:1
VP data Date:= 20/7/2017
VP data Time:= 7:2
VP data Date:= 20/7/2017
VP data Time:= 7:3
VP data Date:= 20/7/2017
VP data Time:= 7:4
VP data Date:= 20/7/2017
VP data Time:= 7:5
VP data Date:= 20/7/2017
VP data Time:= 7:6
VP data Date:= 20/7/2017
VP data Time:= 7:7
Weather station type number 31
connected OK to com port 10
Well, don’t ask me why, but it miraculously suddenly started working again after resetting all the data offsets in the “Offsets/Initial Rain” part of the menu. Maybe it was related to something stored inside the app from the previous station (was a 13 year old WMR 968 - Rest In Pieces…)? Either way, everything seems to be back to normal!