cloudy cloudy

Author Topic: Which USB-Serial Adapter and driver for ElCap  (Read 3581 times)

0 Members and 1 Guest are viewing this topic.

Offline Weather Display

  • Posts: 81,363
  • Davis VP2
  • New Zealand
  • OS/Browser:
  • Win NT 10.0
  • Chrome 57.0.2987.133
    • Weather Display
Re: Which USB-Serial Adapter and driver for ElCap
« Reply #60 on: April 17, 2017, 08:09:15 PM »
when using the ftp option (needed now as https is not currently supported for cronmetar)
it uses FTP login (anynomous login)
and it uses the ftp port number that your normal ftp uses
i.e port 21
that could be where the problem is
what do you have set as the ftp port number in the connections setup in WD?

Offline sdjones

  • Posts: 72
  • Ontario
    • http://weather.mikeoxlong.net
Re: Which USB-Serial Adapter and driver for ElCap
« Reply #61 on: April 17, 2017, 10:17:16 PM »
Port 21.

The connection is made fine. It's when cronmetar and ftpdown tell the server to send the file. That's when the Permission Denied error shows up. You can see it I the capture I posted. You see the IP address of the server with ftp appended to it since I'm using the standard ftp port.

At this point I can get the file myself. Does cronmetar do anything to the fore after it's downloaded to the metar directory?

Offline Weather Display

  • Posts: 81,363
  • Davis VP2
  • New Zealand
  • OS/Browser:
  • Win NT 10.0
  • Chrome 57.0.2987.133
    • Weather Display
Re: Which USB-Serial Adapter and driver for ElCap
« Reply #62 on: April 17, 2017, 10:42:46 PM »
if it works here, and it does work for others (have not seen otherwise) , and you say you are getting a permission denied error, then that points to something on your end , I would think

nothing else is done to the file