Data logger down load repeating data

Running a Davis WMII with the data logger set to 1 minute and the time on the station is synchronized with the computer time.
When down loading the data it repeats the data in the log.

Example: A 5 minute block WD down loads from the data logger will look like this in the log.

8 8 2016 6 1 37.7 79 31.7 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 2 37.7 79 31.8 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 3 37.7 80 32.1 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 4 37.8 79 31.8 30.008 0.0 0.0 109 0.000 0.000 0.031 5.965 37.8
8 8 2016 6 5 37.8 80 32.2 30.008 0.0 0.0 109 0.000 0.000 0.031 5.965 37.8
8 8 2016 6 1 37.7 79 31.7 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 2 37.7 79 31.8 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 3 37.7 80 32.1 30.007 0.0 0.0 109 0.000 0.000 0.031 5.965 37.7
8 8 2016 6 4 37.8 79 31.8 30.008 0.0 0.0 109 0.000 0.000 0.031 5.965 37.8
8 8 2016 6 5 37.8 80 32.2 30.008 0.0 0.0 109 0.000 0.000 0.031 5.965 37.8

Maybe a new setting I am missing as its been doing this over the last several new versions after the data download was fixed for the WMII.
Current version running on the computer is 10.37S B18

what do you have the data pad out setting as under control panel, data logger setup?

The data pad out setting is set at 1 and the logging interval is also set at 1 minute.

Recently had to shut down WD for an update for about an hour and when bringing it back in service the data logger download did the same thing of repeating the data. Any idea as to what could be going on?