wind direction offset

Here I am sending a new set of about 15 minutes after midnight. For the record, was not sent to the web site, 16.12. This is apparent when you reboot. see figure.


ftpavextlog.txt (720 Bytes)

Apparent.png

its not very clear to me what you are trying to say
but if you could email me your settings files i will test/check

What is your Email?

Brian’s email is right there in the signature of his post.

  • Jim

but to me it proves to be invalid email.

its not an invalid email
why do you say its an invalid email?

Mail server writes it invalid.


remove the Brian (and space)

Well, guess who’s :slight_smile:
I sent an email.

Google compiler translates shit themselves.

you need to untick the setting shown in the screen shot

that setting should not be ticked

also I see you have WD set to client mode (it gets the daily hi/lo from the server version, re the other problem.so make sure the time/date on the server version is correct


Clients use.
Well I’ll try and let you know, thanks.
What do you think about the apparent temperature in the WDL why you want to reset?

why you want to reset?
?

I thought why do not reset the minimum and maximum.
Still shows plus 100C and -50C.

for apparent temperature max/min not resetting if temperatures are low in WDL?
try build 306 .zip update to fix that issue

Great, I thought exactly.
B306 longer works, thanks for your cooperation.

So it seemed that everything was fine, but it is not.
It looks as though apparent calculate an average and not an immediate minimum or maximum temperature.
The picture shows the current temperature exceeds the maximum.


Apparent.png

the problem there will be that its 2 different values…the max/min could well be solar type apparent temp compared to non solar apparent temp or vice versa
I will review the code for the next update

I see the problem
use a new .zip update, ready now…

Now everything is ok.
We can move on to the next problem.
YO new topic.