Due to a camera failure I replaced one of my Foscam cameras with the F19821P V2. So far I cannot retrieve a photo using the Weather Display software. I the past I used the IP address and the port with the file name snapshot.cgi. The other camera is working fine with this configuration. Anyone have a suggestion on a file name I can use to retrieve a photo…
Thanks in advance
Ask… and be saved:
http://192.168.0.94:8108/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=put the camera’s name here&pwd= and the password goes here
the IP number:port
You did … do port forwarding on your router/modem.
It all changes when we go with the “fancy” foscams. I have the same camera and it has to go with this new config. just sub in your IP address:your port and the camera name, password
such as:
http://192.168.0.94:8108/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=YardCam&pwd=aardvark1
Thanks that did the trick…really appreciate your assistance…
Ronald