Dew effect on mechanical corrosion and mold

MichaelPT · 28 July 2015 22:30

windgust post:1:

Hi Brain,

I know you are real busy with WD and getting everything re-coded.
Is it possible, (If it does not take a lot of time) to add the %EMC and days to mold to a tag in clientraw.txt
see http://dpcalc.org/

I use this in my server room. Sounds weird but I have seen some trends when it gets hot and the AC
cannot cool the room enough ( I work for a school system so my AC is not the best)

I use my inside temp in the server room and RH to calculate inside DP then check the %emc
I have not checked what the risk values and how quickly damage can be done. But that is my next project.
It would be interesting to see the metal corrosion values, mold risk and damage to electronic devices
caused by dew point in the air.
I ask for clientraw text tag so I can monitor it from home and add it to my webpage.

Anyone else have an opinion on this ?

Thanks

Windgust
Amateur operator (K1DED)

Hi it would be good to have a webpage script, showing the data from wd