This seems to have fixed the issues with yearly temps.
Thank you very much.
The issue with The Station High and Station Low for current date still show as -50 Celsius and 60 Celsius still remains. I have done some investigation and it appears that the records now begin in late June when I moved my data over from WD Windows to WD Mac. The following are examples from my testtags.php file …
EXAMPLE 2
$avtempjan = ‘0.0’;//Average temperature for january from your data
$avtempfeb = ‘0.0’;//Average temperature for february from your data
$avtempmar = ‘0.0’;//Average temperature for march from your data
$avtempapr = ‘0.0’;//Average temperature for april from your data
$avtempmay = ‘0.0’;//Average temperature for may from your data
$avtempjun = ‘0.0’;//Average temperature for june from your data
$avtempjul = ‘19.1’;//Average temperature for july from your data
$avtempaug = ‘21.4’;//Average temperature for august from your data
$avtempsep = ‘19.2’;//Average temperature for september from your data
$avtempoct = ‘0.0’;//Average temperature for october from your data
$avtempnov = ‘0.0’;//Average temperature for november from your data
$avtempdec = ‘0.0’;//Average temperature for december from your data
END EXAMPLES
Is there something I missed when I transferred the data or is this an error in the program?
they come from the wdisplay.ini settings file
e.g
[Record monthly high temp]
make sure that all that data has been copied over from the wdisplay.ini settings file from the windows version of that (i.e copy across those missing months)
Are the station high and station low temperatures for each day also stored in the DISPLAY.INI file? If so, where?
I would like to move the data over but I have had some records set in the last two months so I will have to do a manual compare of the old and new data for these variables before I do the copying.