I never added the port number in the ip address. 1 was selected by default
and is the only com port available according to WD. I just put 192.168.29.246
with 0 and also backed spaced 0 out but WD keeps adding 0 back in. I also tried
Wim van der Kuil’s ip suggestion.
192.168.29.246
meteobridge:[email protected]/cgi-bin/livedataxml.cgi
[email protected]/cgi-bin/livedataxml.cgi
all above ip’s lead to this in debug info:
getting missed meteohub data 20150624182400 20150624182500
OK
Not Found
OK
and a rapidly flashing message that cannot be read because it is flashing to fast.
I have to unckeck enabled and restart WD. Then on restart with enabled unchecked
under debug info:
getting missed meteohub data 20150624182400 20150624182500
OK
Not Found
OK
( connected OK to com port 1 ) only appears under debug info after enabled is
unchecked and WD is restarted.
I ran Advanced port scanner.
Under 192.168.29.246 ports (scanned 67 of 67, opened:3 closed:64)
open ports (3)
22 open (ssh)
53 open (domain)
80 open (www-http)
closed ports (64)
0 - 21 closed
23 - 52 closed
54 - 79 closed
81 - 65535 closed
Vinny