The problem with the update was “fixed” by using the arrow keys instead of clicking on the units. Thanks for that tip.
The problem with getting the data from the logger is still present. The data history window does appear but nothing is downloaded. Here is the data from the debug info
BEGIN DATA
Loaded all time records
Loaded units
Comport open OK
connected OK to com port /dev/cu.SLAB_USBtoUART
Time period too short
Aborted
All data downloaded or did not sync correct!
formating the VP data
vp data read in 1
Comport open OK
connected OK to com port /dev/cu.SLAB_USBtoUART
Weather station type number 31
/Users/MacMini/Documents/wdisplay/webfiles/
**** running cronftpreal
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
/Users/MacMini/Documents/wdisplay/webfiles/
END DATA
Another problem that I have seen is in setting up the Weather Station Type. It accepts the Davis VP default settings but if I select things like
I have Solar + UV
I have Soil Temperature
I have a VP2 with updated firmware (Feb 2006)
It works as long as I have WD running. If I shut down and restart then all the settings that I have selected above are no longer selected.
The cronftpreal is running. I can see it in Activity Monitor. It is connected to my website. I can see it in CPanel on my website. The clientraw.txt file is being created every 3 seconds. However it does not upload.
Hugh