Vaisala Support

[Weather Display]

my post is directed to  emiliotj

[eongibier]

Ok!
Serge

[emiliotj]

Hi Brian, sorry for the late reply but I've been kind of busy this days.

that's correct when I configure  the WXT510 station type I can see a row of correct data that contains all the raw data even the wind speed, but I don't see any readings in WD, but when is configured the MAWS201M type I don't see a relationship of  in the raw data and the station readings, and yes the numbers change from time to time.

I'm starting to believe there is a communication problem between the station's datalogger and WD, it looks like they just can't get along hahahaha, what do you think???

thank you for your time!

[Weather Display]

I think the solution is we use the WXT510 mode
since all the data is appearing there
and I change to parse out that raw data

if you could do a copy/paste from the WS2010/WS2500 data window into a post when in that mode
(change the com port number to stop the data flow)

[emiliotj]

Hi again Brian,

Here is WD using the WXT510 mode, this are the actual readings from the station, but I have no readings in the display, hope this help you to figure out what's going on.

Thank you for your time.

Emilio.


WIND     10.2     196

WIND     10.2     196

PTU   24.8     24.8     24.8     51     59     50     13.9     14.7     13.8     1007.8   1008.1   1007.8   0.00        0.0      0.0   0.00        0.0      0.0    13.78

WIND     11.8     203

WIND     11.8     203

WIND     11.8     203

WIND     11.8     203

WIND     11.8     203

WIND      9.9     202

WIND      9.9     202

WIND      9.9     202

WIND      9.9     202

WIND      9.9     202

WIND      8.7     204

WIND      8.7     204

WIND      8.7     204

WIND      8.7     204

WIND      8.7     204

WIND      8.8     215

WIND      8.8     215

WIND      8.8     215

WIND      8.8     215

WIND      8.8     215

WIND      7.1     197

WIND      7.1     197
Data file update counter 11
updating extra large file
saving the data files
rain amount to set icon 0.0

WIND      7.1     197

WIND      7.1     197   

[Weather Display]

HI
I think I know now what might be wrong

you have the space delimeter in the output as a space instead of a comma (which WD is expecting ( I can change it to also check for a space)
so try changing the output from the station to have a comma as the space de limiter

[emiliotj]

Hi there Brian!

I don't think I can change the output from a space to a coma, unfortunately I don't have access to the datalogger, the manufacturer locked it, what else can we do???

Thanks for the replys


Emilio

[Weather Display]

ah
OK
I will upload a new version now that will check or a space instead of a comma

stand by, I will let you know when its ready

[Weather Display]

try this new update
http://www.weather-display.com/downloadfiles/WeatherD.zip

[emiliotj]

All right!!!

I'll give it a try and let you know what happened!!

Thank you so much!!

[emiliotj]

Hi

I Install the update but still is not working ....  the raw data is ok, but the wind readings are still way off in WD,  are there are some additional settings that I need to do??

thanks in advance


Emilio

[Weather Display]

hi
what now shows in the WS2010/WS2500 data window?
we will crack this, we will get there

[emiliotj]

Hi there,

Sorry for the late reply, this is the raw data in the WS2012/WS2500 window...

Thank you for your time!!

WIND      7.3     265   

WIND      7.3     265   

WIND      7.3     265   

WIND      7.3     265   

WIND      7.3     257   

WIND      7.3     257   

WIND      7.3     257   

WIND      7.3     257   

WIND      7.3     257   

WIND      5.6     252   

WIND      5.6     252   

WIND      5.6     252   

WIND      5.6     252   

WIND      5.6     252   

WIND      6.4     228   

WIND      6.4     228   

WIND      6.4     228   

WIND      6.4     228   

WIND      6.4     228   

PTU   24.0     24.0     23.9     62     72     62     16.4     16.8     15.8     1008.8   1009.0   1008.8   0.00        0.0      0.0   0.00        0.0      0.0    13.77   

WIND      4.3     298   

WIND      4.3     298   

WIND      4.3     298   

WIND      4.3     298   

WIND      4.3     298   

WIND      2.7     278   

WIND      2.7     278   

WIND      2.7     278   

[Weather Display]

Hi
it looks like you have it set to the WXt510 weather station type in WD?
set it back to the Maws station type
and see how that works (now that I have allowed for a space as the de limiter)

[emiliotj]

Hi there

I set the station to MAWS201M and these are the readings, now all sensors are off in WD, any thoughts??


Loaded all time records
loading the data file month82012.inf
#Connecting com port 1
Com port connected OK -> 1
wind found
13,156,288
raw data to be used for the windspeed 288
raw data to be used for the direction 156
wind found
13,156,288
raw data to be used for the windspeed 288
raw data to be used for the direction 156
wind found
13,156,288
raw data to be used for the windspeed 288
raw data to be used for the direction 156
wind found
13,156,288
raw data to be used for the windspeed 288
raw data to be used for the direction 156
wind found
13,156,288
raw data to be used for the windspeed 288
raw data to be used for the direction 156
wind found
13,146,285
raw data to be used for the windspeed 285
raw data to be used for the direction 146
wind found
13,146,285
raw data to be used for the windspeed 285
raw data to be used for the direction 146
wind found
13,146,285
raw data to be used for the windspeed 285
raw data to be used for the direction 146
wind found
13,146,285
raw data to be used for the windspeed 285
raw data to be used for the direction 146
wind found
13,146,285
raw data to be used for the windspeed 285
raw data to be used for the direction 146
wind found
13,141,286
raw data to be used for the windspeed 286
raw data to be used for the direction 141
wind found