1-Wire+sensor UV+WD ayuda por favor

[eb3bvb]

This is catching my website
is the same script that you have but not how to configure it, I find
any file to edit
is created using the Script
ajax-daschboard.php alongside ajaxwdwx.js
greetings
emilio
http://www.eb3bvb.com

[ALITTLEweird1]

OK... Im not at home right now, but open up your Settings.php file and make sure you have set UV=True

[meteonovoli]

Hello, i'm from Italy, i have the same problem, wd don't see the id rom of the UV sensor. Onewireviwver see the sensor, so i copy and paste the UV rom id from onewireviever to wd, but when i click save/reset the id rom don't appear!
PS i have also the solar sensor that work fine!
thanks to all

[ALITTLEweird1]

Do you have a power injector of some sort powering the UV sensor?

[meteonovoli]

Hello, i have a 12vdc stabilized!

[meteonovoli]

through the screv terminal of course...

[ALITTLEweird1]

You may want to start a new thread so this doesnt take over emilio's thread since he's still having some problems with his.

[meteonovoli]

ok 

[eb3bvb]

for meteonovoli
if you have sensors hobby boards
12V power supply
the middle connector together
rj output cable to pc
the number that gives you the ending detecctor two Onewireviwver EE
it copies
control panel
1-wire dallas
UV sensor tab
sensor placed below dende
Boars hobby mark sensor in use
ytiene to work
is how I have it two days ago and it works
only missing values are completely set

[meteonovoli]

Hello, "the middle together" what is?
You see the id rom into the DALLS 1-WIRE MAIN/SAVE SETUP ?

for meteonovoli
if you have sensors hobby boards
12V power supply
the middle connector together
rj output cable to pc
the number that gives you the ending detecctor two Onewireviwver EE
it copies
control panel
1-wire dallas
UV sensor tab
sensor placed below dende
Boars hobby mark sensor in use
ytiene to work
is how I have it two days ago and it works
only missing values are completely set

[eb3bvb]

hobby sensor boards have a black strip
with three screws
+12 V GND DQ
push together the two DQ through a cable
the rom is not in a dallas
you have to take the number and paste

[eb3bvb]

Hi Mark
Settings.php is activated in
but not where the data takes

[ALITTLEweird1]

In Weather display.. Go to View, then click on I think it's called solar graph.. Not really sure cause Im not at home right now... See if Weather display is graphing your UV readings.

[meteonovoli]

Hello, i connect the two central screw (solar and uv) togheter but i have solar but no have uv UV raw value 0...

hobby sensor boards have a black strip
with three screws
+12 V GND DQ
push together the two DQ through a cable
the rom is not in a dallas
you have to take the number and paste

[eb3bvb]

hello
control panel
solar sensor setup
solar max time of day time ...................
lengths is to set latitude
now in my panel
raw current reding
8.1 mv
tomorrow may not read the UV