Iroxdata - TFA Nexus Pro USB

cornish_pasty · 28 July 2009 10:55

wslangerak post:1:

Hi!

Question: is there a chance that the Iroxdata program can be adjusted (or WD for that matter) so that it becomes possible to choose another sensor (out of 4) for the main temperature?
Now WD says: “use channel one for outside temp” when you choose Honeywell TE923/Irox/Nexus and check the “Use direct” option.

I ask this because the TFA Nexus has the well known problem of loosing connection with the temp/hum sensor very often. This is mainly caused by interference on the USB-connection (when you disconnect USB it reconnects immediately).
I found out after a lot of testing that when you put the Nexus on channel 2 (or 3) the connection remains OK. But WD doesn’t accept this as main (outside) temperature.

Any idea if this can be done?

Thanks in advance!

Kees.

I’m having a big problem with my TFA Nexus at the moment , even if I switch channels the temperature/hygro sensor just loses connection soon as I plug in the USB in. It’s a real pain in the back side. If anyone can give me any advise I would most appreciate it. Thanks, Tom