Please speak up, so I can try and help with your problem
Thanks
Actually Brian, I have no serious problems at all. I'm quite happy with
how 9.98e works with my WS2310. And my experimenting with 9.99d
below, is in an effort to help you out. Your directions for updating graphs
from logs worked great and now all of my graphs are P-R-E-T-T-Y.
By the way, if you are the author of
a post, you can change or “edit” it if you forgot to say something. Just
click on the edit button on your post, even days later.
If you want to quote what someone else said, click “quote” button at
the top of their post and you can then include all or part of their text.
Just like I did above. (I know that this forum’s format is new to you)
Now on to 9.99d.
I tried it last night and had problems with it so I went back to 9.98e.
I was too delerious at 0130 to report what was wrong, so I went to bed.
I tried again tonight. In fact, I re-downloaded 9.99d.
I see that you must have made a minor change to it since there is a 12/10
and 12/11 version of it that differ by 1KB in size.
Tonight, bringing up 9.99d for the first time, it froze. No WS2310 data
gathering startup screen and no receiving of data indicator.
Program Error log was:
82 9A B2 8A C6 06 C2
History Stage 1
History Stage 1 (that’s all)
I shut it down and started it again.
I got the data gathering screen, it went through all the normal
motions of collecting 6 minutes of data, but did not record that data
anywhere. (log files or graphs)
Program Error log reported some history stages and a finished history.
but there were no Raw # entries in the error log.
It then started to record current info on the minute and work normally.
It even updated my website on the 10 minute mark.
I then reloaded 9.98e which works great and it collected all the missing
data on startup.
I think you can fix this by comparing the code in this area from 9.98e
with 9.99d.
Thanks,
Herb